Traceless Redox-Annulations of Alicyclic Amines

Abstract

Amines such as 1,2,3,4-tetrahydroisoquinoline undergo redox­-neutral annulations with ortho-(nitromethyl)benzaldehyde. Benzoic­ acid acts as a promoter in these reactions, which involve concurrent amine α-C–H bond and N–H bond functionalization. Subsequent removal of the nitro group provides access to tetrahydroprotoberberines not accessible via typical redox-annulations. Also reported are decarboxylative annulations of ortho-(nitromethyl)benzaldehyde with proline and pipecolic acid.

Key words

C–H bond functionalization - redox-neutral - redox-annulation - denitration - decarboxylative annulation

New methods for the C–H bond functionalization of amines and their derivatives continue to be developed at a rapid pace.[1] [2] However, few approaches have emerged that are compatible with unprotected secondary amines while at the same time enabling α-C–H bond functionalization with concurrent C−N bond formation.[1m,o] Particularly attractive in this regard are redox-annulations of cyclic amines, which allow for the rapid formation of polycyclic amines from simple starting materials (Scheme [1]). Water is the only byproduct in these reactions. Examples of this type of transformation include condensations of amines with ortho­-aminobenzaldehydes to provide aminals (Scheme [1a], X = NR),[3] and related, carboxylic-acid-catalyzed transformations involving α-C–O and α-C–S bond formation.[4] Redox-annulations that achieve α-C–C bond formation with ortho-tolualdehyde derivatives require the presence of at least one electron-withdrawing group on the ortho-methyl group.[5] In addition, activation of an ortho-methyl group has been achieved with heteroaryl substrates (Scheme [1b])[6] and highly electron-deficient o-tolualdehydes (Scheme [1c]).[7] [8] [9] [10] Here, we report the first redox-annulations of amines with ortho-(nitromethyl)benzaldehydes (Scheme [1d]). In these reactions, the nitro group acts as a traceless activator as it can be removed in a subsequent step. The overall strategy represents an attractive new pathway to members and analogues of the tetrahydroprotoberberine family of natural products.[11]

Scheme 1 Examples of amine redox-annulations and present work

ortho-(Nitromethyl)benzaldehyde (1a)[12] and 1,2,3,4-tetrahydroisoquinoline (THIQ) were selected as the model substrates in the initial evaluation of the proposed redox-annulation. Key optimization experiments are summarized in Table [1]. While conditions used in other redox-annulations (reflux in toluene with benzoic acid as a promoter) provided the target product 2a in substantial amounts, improved results were obtained under microwave conditions. The maximum yield of 76% was achieved in a reaction that was performed in dichloroethane solvent at 150 °C for 5 min (entry 4). The reactions exhibited low but variable dia­stereoselectivities. We suspected that the two diastereomers of 2a may interconvert under the reaction conditions by means of a retro-nitro-Mannich/nitro-Mannich sequence with little thermodynamic preference for either dia­stereomer. Indeed, while accompanied by some decomposition, exposure of diastereomerically pure 2a to the reaction conditions led to the recovery of 2a as a nearly 1:1 mixture of diastereomers (Scheme [2]).

Table 1 Reaction Development^a

Entry	THIQ (equiv)	Solvent	T (°C)	Time (min)	Yield (%)	dr
1	1.3	PhMe	reflux	60	56	1:1
2	1.3	DCE	reflux	60	58	1.3:1
3b	1.3	PhMe	150	5	61	1.1:1
4b	1.3	DCE	150	5	76	1:1
5b	2.0	DCE	150	5	61	1.1:1
6b	1.3	DCE	100	5	71	1.4:1
7b	1.3	DCE	100	15	75	1.2:1

^a Reactions were performed on a 0.25 mmol scale. All yields correspond to isolated yields. The dr was determined by ¹H NMR analysis after purification.

^b Performed under microwave irradiation.

Scheme 2 Equilibration experiment

We then turned our attention to the denitration step (Table [2]). Following some optimization, conditions similar to those developed by Carreira and co-workers were found to be efficient in removing the nitro group,[13] providing product 3a in up to 70% yield (entry 6).

Table 2 Optimization of the Denitration Step^a

Entry	Solvent	H2 (atm)	Additive (equiv)	T (°C)	Time (h)	Yield (%)
1	EtOH	10.2	–	85	4.5 h	57
2	EtOH	10.2	–	rt	4.5 h	trace
3b	EtOH	1	–	85	4.5 h	trace
4b	EtOH	10.2	–	85	24 h	54
5	PhMe	10.2	–	85	4.5 h	54
6	PhMe	10.2	AcOH (1.0)	85	4.5 h	70
7	PhMe	10.2	AcOH (2.0)	85	4.5 h	26

^a Reactions were performed on a 0.25 mmol scale. All yields correspond to isolated yields.

^b Reaction was performed on a 0.15 mmol scale.

The annulation/denitration sequence was applied to a number of substituted tetrahydroisoquinolines (Scheme [3]). Moderate to good yields were achieved in the individual steps with acceptable overall yields. Gratifyingly, 1-aryl tetra­hydroisoquinolines with electronically diverse substituents also readily participated in redox-annulations to provide the corresponding sterically congested products as essentially single diastereomers in reasonable yields (Scheme [4]). A related tetrahydro-β-carboline also participated in the reaction but provided the annulation product in significantly lower yield.

Scheme 3 Evaluation of substituted tetrahydroisoquinolines

Scheme 4 Formation of sterically congested tetrahydroprotoberberine analogues

Unfortunately, the products shown in Scheme [4] were not amenable to denitration under the reaction conditions employed above. However, removal of the nitro group was readily achieved with tributyltin hydride (Scheme [5]).[14]

Scheme 5 Denitration of a sterically congested annulation product

Despite significant experimentation, less activated amines such as pyrrolidine and piperidine did not participate in redox-annulations with ortho-(nitromethyl)benz­aldehyde (1a). However, as has been shown in a number of related reactions,[15] [16] the corresponding decarboxylative reactions in which proline and pipecolic acid are used in place of pyrrolidine and piperidine provided annulation products in good yields (Scheme [6]). Denitration under Carreira­ conditions was also successful.

Scheme 6 Decarboxylative annulation/denitration

In conclusion, we have achieved the first traceless redox-annulations of amines using a substrate with an activating nitro group that can be subsequently removed. This strategy provides access to products that are not readily available by using conventional synthetic approaches.

Starting materials, reagents, and solvents were purchased from commercial sources and used as received unless stated otherwise. 1,2,3,4-Tetrahydroisoquinoline was freshly distilled prior to use. l-Proline, l/d-pipecolic acid, 2,2′-(diazene-1,2-diyl)bis(2-methylpropanenitrile), and tributyltin hydride were used as received. HPLC grade 1,2-dichloroethane (DCE) was purchased from Sigma–Aldrich and was used without further purification. Purification of reaction products was carried out by flash column chromatography using Sorbent Technologies Standard Grade silica gel (60 Å, 230–400 mesh). Analytical thin-layer chromatography was performed on EM Reagent 0.25 mm silica gel 60 F254 plates. Visualization was accomplished with UV light and Dragendorff–Munier stains, followed by heating. ¹H NMR spectra were recorded with a Bruker 400 MHz or Bruker 600 MHz instrument and chemical shifts are reported in ppm using the solvent as an internal standard (CDCl₃ at 7.26 ppm). Data are reported as app = apparent, s = singlet, d = doublet, t = triplet, q = quartet, m = multiplet, comp = complex, br = broad; coupling constant(s) in Hz. Proton-decoupled carbon nuclear magnetic resonance spectra (¹³C NMR) spectra were recorded with a Bruker 400 MHz or Bruker 600 MHz instrument and chemical shifts are reported in ppm using the solvent as an internal standard (CDCl₃ at 77.16 ppm). Diastereomeric ratios of the products were determined by ¹H NMR analysis of the purified products. Accurate mass data (ESI) was obtained with Agilent 1260 Infinity II LC/MSD using MassWorks 5.0 from CERNO bioscience.[17] Reactions under microwave irradiation were conducted with a Biotage Initiator+, SW version: 4.1.4 build 11991.

1-Phenyl-1,2,3,4-tetrahydroisoquinoline,[18a] 1-(4-fluorophenyl)-1,2,3,4-tetrahydroisoquinoline,[18b] 1-(4-chlorophenyl)-1,2,3,4-tetrahydroisoquinoline,[18b] 1-(4-bromophenyl)-1,2,3,4-tetrahydroisoquinoline,[18c] 1-(4-(trifluoromethyl)phenyl)-1,2,3,4-tetrahydroisoquinoline,[18d] 1-(4-methoxyphenyl)-1,2,3,4-tetrahydroisoquinoline,[18b] 1-(p-tolyl)-1,2,3,4-tetrahydroisoquinoline,[18b] 1-(m-tolyl)-1,2,3,4-tetrahydroisoquinoline,[18e] 1-(4-bromophenyl)-2,3,4,9-tetrahydro-1H-pyrido[3,4-b]indole,[18f] 6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline,[18g] 5,6,7,8-tetrahydro-[1,3]dioxolo[4,5-g]isoquinoline,[18h] 5-methyl-1,2,3,4-tetrahydroisoquinoline,[18i] and 2-(nitromethyl)benzaldehyde[18j] were prepared according to reported procedures and their published characterization data matched our own in all respects.

13-Nitro-5,8,13,13a-tetrahydro-6H-isoquinolino[3,2-a]isoquinoline (2a)

2-(Nitromethyl)benzaldehyde (1a) (41.3 mg, 0.25 mmol, 1 equiv), 1,2,3,4-tetrahydroisoquinoline (41.5 μL, 0.33 mmol, 1.3 equiv), and benzoic acid (40.3 mg, 0.33 mmol, 1.3 equiv) were added to a microwave vial charged with a stir bar. Dichloroethane (2.5 mL) was added and the microwave vial was sealed. The vial was stirred until complete dissolution of the solids and then placed in the microwave, followed by heating for 5 minutes at 150 °C with the instrument set to low absorption. The reaction mixture was neutralized with sat. NaHCO_­3 (15 mL) and extracted with EtOAc (3 × 15 mL). The combined organic layers were dried over Na₂SO₄. The solvent was removed under­ reduced pressure and the crude residue was purified by silica gel chromatography using hexanes containing EtOAc (0–15%), yielding 2a as a mixture of diastereomers with a dr of 1:1.

Yield: 76% (53.3 mg); brown oil; R_f = 0.16 (hexanes/EtOAc 90:10 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.47 (dd, J = 7.7, 1.3 Hz, 0.5 H), 7.43–7.35 (comp, 1 H), 7.34–7.10 (comp, 6 H), 7.04–6.96 (m, 0.5 H), 6.17 (d, J = 3.3 Hz, 0.5 H), 5.90 (d, J = 8.6 Hz, 0.5 H), 4.76 (d, J = 8.6 Hz, 0.5 H), 4.38 (dd, J = 15.8, 1.3 Hz, 0.5 H), 4.26 (d, J = 15.3 Hz, 0.5 H), 4.20 (d, J = 3.3 Hz, 0.5 H), 3.96 (d, J = 15.8 Hz, 0.5 H), 3.79 (d, J = 15.3 Hz, 0.5 H), 3.33–3.19 (comp, 1 H), 3.08–2.96 (comp, 2 H), 2.92–2.85 (m, 0.5 H), 2.77–2.69 (m, 0.5 H).

¹³C NMR (151 MHz, CDCl₃): δ = 136.4, 136.4, 134.7, 134.7, 134.1, 130.0, 129.6, 129.6, 129.5, 129.3, 128.6, 127.8, 127.7, 127.4, 127.3, 127.2, 127.0, 127.0, 126.9, 126.6, 126.3, 126.0, 125.7, 90.1, 87.0, 63.3, 62.1, 57.8, 56.7, 50.8, 48.0, 29.3, 29.2.

HRMS (ESI): m/z [M + H]⁺ calcd for C₁₇H₁₇N₂O₂: 281.1285; found: 281.1655. Spectral Accuracy: 98.8%.

General Procedure A

2-(Nitromethyl)benzaldehyde (1a) (82.6 mg, 0.5 mmol, 1 equiv), amine (0.65 mmol, 1.3 equiv), and benzoic acid (79.4 mg, 0.65 mmol, 1.3 equiv) were added to a microwave vial charged with a stir bar. Dichloroethane (5.0 mL) was added and the microwave vial was sealed. The vial was stirred until complete dissolution of the solids and placed in the microwave, followed by heating for 5 minutes at 150 °C with the instrument set to low absorption. The reaction mixture was neutralized with sat. NaHCO₃ (20 mL) and extracted with EtOAc (3 × 20 mL). The combined organic layers were dried over Na₂SO₄. The solvent was removed under reduced pressure and the crude residue was purified by silica gel chromatography. The product was used directly in the next step.

General Procedure B

The annulation product obtained according to General Procedure A was added to a reaction vial charged with acetic acid (1.0 equiv) and a stir bar. Toluene (5.0 mL) was added followed by 20% wt. Pd(OH)₂/C (66.7 mg). The reaction vial was placed in a bomb and back filled with H₂ (5×). H₂ was added to the bomb until the internal pressure reached 150 PSI. The reaction mixture was heated at 85 °C for 4.5 hours. The reaction mixture was then allowed to cool to r.t., followed by removal of the solvent under reduced pressure. The crude mixture was purified by silica gel chromatography followed by treatment with sat. NaHCO₃ (15 mL) and extraction with EtOAc (3 × 15 mL). The combined organic layers were dried over Na₂SO₄. The solvent was removed under reduced pressure yielding the final product.

General Procedure C

2-(Nitromethyl)benzaldehyde (1a) (41.3 mg, 0.25 mmol, 1 equiv), amine (0.50 mmol, 2.0 equiv), and benzoic acid (40.3 mg, 0.33 mmol, 1.3 equiv) were added to a microwave vial charged with a stir bar. Dichloroethane (2.5 mL) was added and the microwave vial was sealed. The vial was stirred until complete dissolution of the solids and placed in the microwave, followed by heating for 15 minutes at 115 °C with the microwave set to low absorption. The reaction mixture was neutralized with sat. NaHCO₃ (15 mL) and extracted with EtOAc (3 × 15 mL). The combined organic layers were dried over Na₂SO₄. The solvent was removed under reduced pressure and the crude residue was purified by silica gel chromatography.

13-Nitro-13a-phenyl-5,8,13,13a-tetrahydro-6H-isoquinolino-[3,2-a]isoquinoline (2e)

By following General Procedure C, compound (±)-2e was obtained from aldehyde 1a (41.3 mg, 0.25 mmol, 1equiv) and 1-phenyl-1,2,3,4-tetrahydroisoquinoline (104.g mg, 0.5 mmol, 2.0 equiv). Hexanes containing EtOAc (0–10%) was used as the eluent for silica gel chromatography.

Yield: 70% (62.4 mg) and a > 20:1 diastereomeric ratio; white solid; R_f  = 0.13 (hexanes/EtOAc 95:5 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.58 (dd, J = 7.6, 1.5 Hz, 1 H), 7.39–7.34 (comp, 2 H), 7.25–7.16 (comp, 3 H), 7.15–7.09 (comp, 4 H), 7.03 (dd, J = 8.0, 1.2 Hz, 1 H), 6.83–6.78 (comp, 2 H), 6.59 (s, 1 H), 3.93 (d, J = 16.3 Hz, 1 H), 3.39–3.26 (comp, 3 H), 3.07–3.00 (m, 1 H), 2.91–2.84 (m, 1 H).

¹³C NMR (151 MHz, CDCl₃): δ = 139.6, 136.9, 136.8, 136.0, 129.6, 129.2, 128.9, 128.5, 128.4, 128.3, 127.8, 127.6, 127.5, 127.3, 126.8, 126.2, 91.5, 65.8, 52.3, 45.6, 29.5.

HRMS (ESI): m/z [M + H]⁺ calcd for C₂₃H₂₁N₂O₂: 357.1598; found: 357.1589. Spectral Accuracy: 97.3%.

13a-(4-Fluorophenyl)-13-nitro-5,8,13,13a-tetrahydro-6H-isoquinolino[3,2-a]isoquinoline (2f)

By following General Procedure C, compound (±)-2f was obtained from aldehyde 1a (41.3 mg, 0.25 mmol, 1 equiv) and 1-(4-fluorophenyl)-1,2,3,4-tetrahydroisoquinoline (113.g mg, 0.5 mmol, 2.0 equiv). Hexanes containing EtOAc (0–10%) was used as the eluent for silica gel chromatography.

Yield: 64% (59.9 mg) and a > 20:1 diastereomeric ratio; off-white solid; R_f = 0.30 (hexanes/EtOAc 90:10 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.56 (dd, J = 7.7, 1.4 Hz, 1 H), 7.38 (app td, J = 7.5, 1.5 Hz, 1 H), 7.34 (app td, J = 7.5, 1.4 Hz, 1 H), 7.23–7.11 (comp, 4 H), 7.00 (dd, J = 7.9, 1.3 Hz, 1 H), 6.82 (app t, J = 8.7 Hz, 2 H), 6.79–6.74 (comp, 2 H), 6.53 (s, 1 H), 3.94 (d, J = 16.3 Hz, 1 H), 3.37–3.27 (comp, 2 H), 3.21 (app td, J = 11.6, 3.3 Hz, 1 H), 3.03 (ddd, J = 11.8, 6.0, 1.9 Hz, 1 H), 2.85 (app dt, J = 15.6, 2.7 Hz, 1 H).

¹³C NMR (151 MHz, CDCl₃): δ = 161.8 (d, J _C–F = 247.8 Hz), 136.7, 136.0, 135.4 (d, J _C–F = 3.2 Hz), 130.2 (d, J _C–F = 7.8 Hz), 129.8, 129.0, 128.9, 128.4, 128.2, 127.6, 127.5, 126.9, 126.3, 114.7 (d, J _C–F = 21.0 Hz), 91.5, 65.4, 52.2, 45.5, 29.5.

HRMS (ESI): m/z [M + H]⁺ calcd for C₂₃H₂₀FN₂O₂: 375.1503; found: 375.1379. Spectral Accuracy: 97.4%.

13a-(4-Chlorophenyl)-13-nitro-5,8,13,13a-tetrahydro-6H-isoquinolino[3,2-a]isoquinoline (2g)

By following General Procedure C, compound (±)-2g was obtained from aldehyde 1a (41.3 mg, 0.25 mmol, 1 equiv) and 1-(4-chlorophenyl)-1,2,3,4-tetrahydroisoquinoline (121.9 mg, 0.5 mmol, 2.0 equiv). Hexanes containing EtOAc (0–15%) was used as the eluent for silica gel chromatography.

Yield: 66% (64.5 mg) and > 20:1 diastereomeric ratio; off-white solid; R_f = 0.52 (hexanes/EtOAc 80:20 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.56 (dd, J = 7.6, 1.4 Hz, 1 H), 7.39–7.33 (comp, 2 H), 7.29–7.11 (comp, 6 H), 7.06–6.96 (m, 1 H), 6.76–6.71 (comp, 2 H), 6.52 (s, 1 H), 3.95 (d, J = 16.3 Hz, 1 H), 3.38–3.27 (comp, 2 H), 3.22 (app td, J = 11.6, 3.2 Hz, 1 H), 3.05 (dd, J = 12.0, 5.8 Hz, 1 H), 2.85 (d, J = 15.5 Hz, 1 H).

¹³C NMR (151 MHz, CDCl₃): δ = 138.1, 136.6, 136.4, 136.0, 133.6, 129.8, 129.8, 129.0, 128.8, 128.4, 128.2, 128.0, 127.6, 127.6, 126.8, 126.3, 91.3, 65.5, 52.2, 45.6, 29.4.

HRMS (ESI): m/z [M + H]⁺ calcd for C₂₃H₂₀ClN₂O₂: 391.1208; found: 391.1429. Spectral Accuracy: 97.2%.

13a-(4-Bromophenyl)-13-nitro-5,8,13,13a-tetrahydro-6H-isoquinolino[3,2-a]isoquinoline (2h)

By following General Procedure C, compound (±)-2h was obtained from aldehyde 1a (41.3 mg, 0.25 mmol, 1 equiv) and 1-(4-bromophenyl)-1,2,3,4-tetrahydroisoquinoline (144.1 mg, 0.5 mmol, 2.0 equiv). Hexanes containing EtOAc (0–10%) was used as the eluent for silica gel chromatography.

Yield: 71% (77.3 mg) and > 20:1 diastereomeric ratio; off-white solid; R_f = 0.27 (hexanes/EtOAc 90:10 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.58 (dd, J = 7.7, 1.4 Hz, 1 H), 7.42–7.35 (comp, 2 H), 7.33–7.25 (comp, 2 H), 7.25–7.08 (comp, 4 H), 7.08–7.00 (m, 1 H), 6.72–6.67 (comp, 2 H), 6.54 (s, 1 H), 3.97 (d, J = 16.3 Hz, 1 H), 3.41–3.29 (comp, 2 H), 3.25 (app td, J = 11.6, 3.2 Hz, 1 H), 3.07 (ddd, J = 12.0, 6.0, 2.0 Hz, 1 H), 2.87 (app dt, J = 15.4, 2.6 Hz, 1 H).

¹³C NMR (151 MHz, CDCl₃): δ = 138.6, 136.6, 136.3, 136.0, 131.0, 130.1, 129.8, 129.0, 128.8, 128.4, 128.2, 127.6, 127.6, 126.8, 126.3, 121.8, 91.2, 65.5, 52.2, 45.5, 29.4.

HRMS (ESI): m/z [M + H]⁺ calcd for C₂₃H₂₀BrN₂O₂: 435.0703; found: 435.0610. Spectral Accuracy: 98.1%.

13-Nitro-13a-(4-(trifluoromethyl)phenyl)-5,8,13,13a-tetrahydro-6H-isoquinolino[3,2-a]isoquinoline (2i)

By following General Procedure C, compound (±)-2i was obtained from aldehyde 1a (41.3 mg, 0.25 mmol, 1 equiv) and 1-(4-(trifluoromethyl)phenyl)-1,2,3,4-tetrahydroisoquinoline (138.6 mg, 0.5 mmol, 2.0 equiv). Hexanes containing EtOAc (0–10%) was used as the eluent for silica gel chromatography.

Yield: 69% (73.2 mg) and > 20:1 diastereomeric ratio; off-white solid; R_f = 0.30 (hexanes/EtOAc 90:10 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.58 (dd, J = 7.6, 1.5 Hz, 1 H), 7.43–7.32 (comp, 4 H), 7.24–7.17 (comp, 2 H), 7.14 (app ddt, J = 6.5, 4.6, 2.1 Hz, 2 H), 6.99 (dd, J = 7.9, 1.2 Hz, 1 H), 6.94 (d, J = 8.3 Hz, 2 H), 6.57 (s, 1 H), 3.97 (d, J = 16.4 Hz, 1 H), 3.40–3.30 (comp, 2 H), 3.26 (app td, J = 11.5, 3.0 Hz, 1 H), 3.18–3.05 (m, 1 H), 2.89 (dd, J = 15.7, 2.9 Hz, 1 H).

¹³C NMR (151 MHz, CDCl₃): δ = 143.7, 136.5, 136.0, 129.9, 129.7 (q, J _C–F = 32.6 Hz), 129.2, 128.8, 128.7, 128.5, 128.2, 127.7, 126.9, 126.4, 124.8 (q, J _C–F = 3.8 Hz), 123.9 (q, J _C–F = 272.4 Hz), 91.1, 65.6, 52.2, 45.6, 29.4.

HRMS (ESI): m/z [M + H]⁺ calcd for C₂₄H₂₀F₃N₂O₂: 425.1471; found: 425.1820. Spectral Accuracy: 97.5%.

13a-(4-Methoxyphenyl)-13-nitro-5,8,13,13a-tetrahydro-6H-isoquinolino[3,2-a]isoquinoline (2j)

By following General Procedure C, compound (±)-2j was obtained from aldehyde 1a (41.3 mg, 0.25 mmol, 1 equiv) and 1-(4-methoxyphenyl)-1,2,3,4-tetrahydroisoquinoline (119.7 mg, 0.5 mmol, 2.0 equiv). Hexanes containing EtOAc (0–10%) was used as the eluent for silica gel chromatography.

Yield: 40% (38.6 mg) and > 20:1 diastereomeric ratio; off-white solid; R_f = 0.19 (hexanes/EtOAc 90:10 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.60–7.54 (m, 1 H), 7.39–7.32 (comp, 2 H), 7.21–7.09 (comp, 4 H), 7.07–6.97 (m, 1 H), 6.73–6.68 (comp, 2 H), 6.68–6.62 (comp, 2 H), 6.54 (s, 1 H), 3.91 (d, J = 16.1 Hz, 1 H), 3.71 (s, 3 H), 3.39–3.27 (comp, 2 H), 3.23 (app td, J = 11.6, 3.2 Hz, 1 H), 3.00 (ddd, J = 11.7, 5.9, 1.9 Hz, 1 H), 2.84 (app dt, J = 15.4, 2.6 Hz, 1 H).

¹³C NMR (151 MHz, CDCl₃): δ = 158.7, 137.2, 136.9, 136.0, 131.6, 129.8, 129.6, 129.2, 128.9, 128.4, 128.3, 127.5, 127.3, 126.8, 126.1, 113.0, 91.7, 65.5, 55.2, 52.3, 45.5, 29.6.

HRMS (ESI): m/z [M + H]⁺ calcd for C₂₄H₂₃N₂O₃: 387.1703; found: 387.1899. Spectral Accuracy: 98.8%.

13-Nitro-13a-(p-tolyl)-5,8,13,13a-tetrahydro-6H-isoquinolino-[3,2-a]isoquinoline (2k)

By following General Procedure C, compound (±)-2k was obtained from aldehyde 1a (41.3 mg, 0.25 mmol, 1 equiv) and 1-(p-tolyl)-1,2,3,4-tetrahydroisoquinoline (111.7 mg, 0.5 mmol, 2.0 equiv). Hexanes containing EtOAc (0–10%) was used as the eluent for silica gel chromatography.

Yield: 61% (56.5 mg) and > 20:1 diastereomeric ratio; off-white solid; R_f = 0.32 (hexanes/EtOAc 90:10 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.57 (d, J = 7.9, 1.2 Hz, 1 H), 7.40–7.31 (comp, 2 H), 7.24–7.15 (comp, 2 H), 7.12 (ddd, J = 9.5, 7.1, 1.9 Hz, 2 H), 7.03 (d, J = 7.9, 1.2 Hz, 1 H), 6.94 (d, J = 8.2 Hz, 2 H), 6.70–6.65 (comp, 2 H), 6.57 (s, 1 H), 3.91 (d, J = 16.2 Hz, 1 H), 3.39–3.24 (comp, 3 H), 3.05–2.99 (m, 1 H), 2.85 (dd, J = 15.3, 3.0 Hz, 1 H), 2.24 (s, 3 H).

¹³C NMR (151 MHz, CDCl₃): δ = 137.3, 137.1, 136.9, 136.5, 136.0, 129.5, 129.3, 128.9, 128.5, 128.5, 128.4, 128.3, 127.4, 127.2, 126.8, 126.1, 91.62, 65.7, 52.3, 45.56, 29.6, 21.0.

HRMS (ESI): m/z [M + H]⁺ calcd for C₂₄H₂₃N₂O₂: 371.1759; found: 371.1935. Spectral Accuracy: 97.5%.

13-Nitro-13a-(m-tolyl)-5,8,13,13a-tetrahydro-6H-isoquinolino-[3,2-a]isoquinoline (2l)

By following General Procedure C, compound (±)-2l was obtained from aldehyde 1a (41.3 mg, 0.25 mmol, 1 equiv) and 1-(m-tolyl)-1,2,3,4-tetrahydroisoquinoline (111.7 mg, 0.5 mmol, 2.0 equiv). Hexanes containing EtOAc (0–10%) was used as the eluent for silica gel chromatography.

Yield: 60% (55.6 mg) and > 20:1 diastereomeric ratio; off-white solid; R_f = 0.28 (hexanes/EtOAc 90:10 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.57 (dd, J = 7.6, 1.5 Hz, 1 H), 7.38–7.32 (comp, 2 H), 7.23–7.16 (comp, 2 H), 7.12 (app ddt, J = 6.4, 4.5, 2.2 Hz, 2 H), 7.07–6.96 (comp, 3 H), 6.66–6.54 (comp, 3 H), 3.92 (d, J = 16.2 Hz, 1 H), 3.39 (d, J = 16.2 Hz, 1 H), 3.35–3.27 (comp, 2 H), 3.09–3.01 (m, 1 H), 2.92–2.83 (m, 1 H), 2.15 (s, 3 H).

¹³C NMR (151 MHz, CDCl₃): δ = 139.6, 137.3, 136.9, 136.8, 135.9, 129.4, 129.4, 129.2, 128.8, 128.5, 128.3, 128.3, 127.5, 127.3, 127.2, 126.7, 126.0, 125.3, 91.5, 65.7, 52.3, 45.5, 29.5, 21.8.

HRMS (ESI): m/z [M + H]⁺ calcd for C₂₄H₂₃N₂O₂: 371.1754; found: 371.2009. Spectral Accuracy: 98.2%.

13b-(4-Bromophenyl)-14-nitro-5,7,8,13,13b,14-hexahydroindolo-[2′,3′:3,4]pyrido[1,2-b]isoquinoline (2m)

2-(Nitromethyl)benzaldehyde (82.6 mg, 0.5 mmol, 1 equiv), 1-(4-bromophenyl)-2,3,4,9-tetrahydro-1H-pyrido[3,4-b]indole (327.2 mg, 1.0 mmol, 2.0 equiv), and benzoic acid (79.4 mg, 0.65 mmol, 1.3 equiv) were added to a microwave vial charged with a stir bar. Dichloroethane (5.0 mL) was added and the microwave vial was sealed. The vial was stirred and placed in the microwave, followed by heating for 15 minutes at 115 °C with the microwave set to low absorption. The reaction mixture was neutralized with sat. NaHCO₃ (20 mL) and extracted with EtOAc (3 × 20 mL). The combined organic layers were dried over Na₂SO₄. The solvent was removed under reduced pressure and the crude residue purified by silica gel chromatography using hexanes containing EtOAc (0–15%) as the eluent, yielding 2m.

Yield: 24% (56.9 mg) and > 20:1 diastereomeric ratio; pale-green solid; R_f = 0.40 (hexanes/EtOAc 80:20 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.83 (s, 1 H), 7.59 (d, J = 7.7 Hz, 1 H), 7.49–7.41 (comp, 2 H), 7.38 (app td, J = 7.5, 1.3 Hz, 1 H), 7.32–7.26 (comp, 4 H), 7.24–7.19 (comp, 2 H), 6.73 (d, J = 8.3 Hz, 2 H), 6.51 (s, 1 H), 4.08 (d, J = 16.3 Hz, 1 H), 3.48 (d, J = 16.3 Hz, 1 H), 3.22 (app td, J = 12.7, 11.9, 3.9 Hz, 1 H), 3.13 (app ddt, J = 16.4, 10.7, 4.4 Hz, 2 H), 2.98–2.91 (m, 1 H).

¹³C NMR (151 MHz, CDCl₃): δ = 137.0, 131.5, 130.9, 130.0, 129.9, 128.6, 128.1, 127.8, 127.0, 126.4, 122.9, 119.9, 118.9, 113.4, 111.5, 90.0, 63.8, 51.5, 46.7, 21.3.

HRMS (ESI): m/z [M + H]⁺ calcd for C₂₅H₂₁BrN₃O₂: 474.0812; found: 474.0616. Spectral Accuracy: 97.7%.

5,8,13,13a-Tetrahydro-6H-isoquinolino[3,2-a]isoquinoline (3a)

By following General Procedures A and B, compound (±)-3a was obtained from aldehyde 1a (82.6 mg, 0.5 mmol, 1 equiv) and 1,2,3,4-tetrahydroisoquinoline (81.7 μL, 0.65 mmol, 1.3 equiv). Hexanes containing EtOAc (0–20%) was used as the eluent for silica gel chromatography. Characterization data for 3a match literature reports in all respects.[19a] [19b]

Yield: 53% (62.4 mg) over two steps; yellow solid; R_f = 0.39 (hexanes/EtOAc 70:30 v/v).

¹H NMR (400 MHz, CDCl₃): δ = 7.30 (d, J = 7.0 Hz, 1 H), 7.26–7.14 (comp, 6 H), 7.10 (dd, J = 6.5, 2.7 Hz, 1 H), 4.06 (d, J = 14.9 Hz, 1 H), 3.85–3.67 (comp, 2 H), 3.48–3.36 (m, 1 H), 3.32–3.15 (comp, 2 H), 2.96 (ddd, J = 16.3, 11.3, 1.8 Hz, 1 H), 2.85–2.75 (m, 1 H), 2.72–2.62 (m, 1 H).

¹³C NMR (101 MHz, CDCl₃): δ = 136.0, 134.6, 134.6, 134.5, 129.0, 128.9, 126.4, 126.3, 126.3, 126.2, 126.0, 125.6, 60.0, 58.7, 51.3, 36.8, 29.6.

HRMS (ESI): m/z [M + H]⁺ calcd for C₁₇H₁₈N: 236.1434; found: 236.1526. Spectral Accuracy: 98.6%.

4-Methyl-5,8,13,13a-tetrahydro-6H-isoquinolino[3,2-a]isoquinoline (3b)

By following General Procedures A and B, compound (±)-3b was obtained from aldehyde 1a (82.6 mg, 0.5 mmol, 1 equiv) and 5-methyl-1,2,3,4-tetrahydroisoquinoline (95.7 mg, 0.65 mmol, 1.3 equiv). Hexanes containing EtOAc (0–10%) was used as the eluent for silica gel chromatography.

Yield: 47% (58.6 mg) over two steps; white solid; R_f = 0.25 (hexanes/EtOAc 90:10 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.28–7.17 (comp, 5 H), 7.13–7.10 (comp, 2 H), 4.09 (d, J = 14.9 Hz, 1 H), 3.87–3.69 (comp, 2 H), 3.42 (dd, J = 16.3, 4.1 Hz, 1 H), 3.27 (ddd, J = 11.5, 5.8, 2.2 Hz, 1 H), 3.10–2.88 (comp, 2 H), 2.77 (app dt, J = 16.5, 2.9 Hz, 1 H), 2.67 (app td, J = 11.4, 3.8 Hz, 1 H), 2.31 (s, 3 H).

¹³C NMR (151 MHz, CDCl₃): δ = 138.0, 136.3, 134.6, 134.4, 133.2, 128.8, 127.6, 126.4, 126.2, 125.9, 125.9, 123.3, 60.1, 58.8, 51.2, 36.9, 27.1, 19.4.

HRMS (ESI): m/z [M + H]⁺ calcd for C₁₈H₂₀N: 250.1590; found: 250.1705. Spectral Accuracy: 99.0%.

2,3-Dimethoxy-5,8,13,13a-tetrahydro-6H-isoquinolino[3,2-a]isoquinoline (3c)

By following General Procedures A and B, compound (±)-3c was obtained from aldehyde 1a (82.6 mg, 0.5 mmol, 1 equiv) and 6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline (125.6 mg, 0.65 mmol, 1.3 equiv). Hexanes containing EtOAc (0–40%) was used as the eluent for silica gel chromatography. Characterization data for 3c match a literature report in all respects.[19c]

Yield: 34% (50.2 mg) over two steps; white solid; R_f = 0.14 (hexanes/EtOAc 75:25 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.20–7.12 (comp, 3 H), 7.11–7.06 (m, 1 H), 6.75 (s, 1 H), 6.62 (s, 1 H), 4.04 (d, J = 14.9 Hz, 1 H), 3.90 (s, 3 H), 3.87 (s, 3 H), 3.78–3.73 (m, 1 H), 3.70–3.62 (m, 1 H), 3.34 (dd, J = 16.2, 3.9 Hz, 1 H), 3.20–3.12 (comp, 2 H), 2.98–2.87 (m, 1 H), 2.73–2.60 (comp, 2 H).

¹³C NMR (151 MHz, CDCl₃): δ = 147.6, 147.6, 134.4, 129.7, 128.8, 126.7, 126.4, 126.2, 126.0, 111.4, 108.6, 59.6, 58.6, 56.2, 55.9, 51.4, 36.8, 29.0.

HRMS (ESI): m/z [M + H]⁺ calcd for C₁₉H₂₂NO₂: 296.1645; found: 296.1739. Spectral Accuracy: 98.6%.

5,8,13,13a-Tetrahydro-6H-[1,3]dioxolo[4,5-g]isoquinolino-[3,2-a]isoquinoline (3d)

By following General Procedures A and B, compound (±)-3d was obtained from aldehyde 1a (82.6 mg, 0.5 mmol, 1 equiv) and 5,6,7,8-tetrahydro[1,3]dioxolo[4,5-g]isoquinoline (115.2 mg, 0.65 mmol, 1.3 equiv). Hexanes containing EtOAc (0–20%) was used as the eluent for silica gel chromatography. Characterization data for 3d match a literature report in all respects.[19b]

Yield: 38% (53.1 mg) over two steps; white solid; R_f = 0.28 (hexanes/EtOAc 75:25 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.21–7.13 (comp, 3 H), 7.11–7.05 (m, 1 H), 6.76 (s, 1 H), 6.60 (s, 1 H), 5.92–5.91 (comp, 2 H), 4.03 (d, J = 14.9 Hz, 1 H), 3.75 (d, J = 14.9 Hz, 1 H), 3.62 (dd, J = 11.2, 4.0 Hz, 1 H), 3.29 (dd, J = 16.2, 4.0 Hz, 1 H), 3.18–3.09 (comp, 2 H), 2.95–2.87 (m, 1 H), 2.71–2.58 (comp, 2 H).

¹³C NMR (151 MHz, CDCl₃): δ = 146.3, 146.1, 134.4, 134.3, 130.8, 128.8, 127.8, 126.4, 126.2, 126.0, 108.5, 105.6, 100.9, 60.0, 58.6, 51.4, 36.9, 29.6.

HRMS (ESI): m/z [M + H]⁺ calcd for C₁₈H₁₈NO₂: 280.1332; found: 280.1565. Spectral Accuracy: 99.1%.

13a-Phenyl-5,8,13,13a-tetrahydro-6H-isoquinolino[3,2-a]isoquinoline (3e)

Compound (±)-2e (71.3 mg, 0.20 mmol. 1.0 equiv), and AIBN (9.9 mg, 0.06 mmol, 0.3 equiv) was added to benzene (2.0 mL) and stirred until complete dissolution. Tributyltin hydride (80.9 μL, 0.3 mmol, 1.5 equiv) was then added and the reaction mixture was heated under reflux for 1 hour. The reaction mixture was extracted with 1 M HCl (3 × 10 mL) and the combined aqueous layers were basified with 1 M NaOH. The aqueous layer was back extracted with EtOAc (3 × 15 mL) and the combined organic layers were dried over Na₂SO₄. The solvent was removed under reduced pressure and the crude residue was purified by silica gel chromatography using hexanes containing EtOAc (0–5%) as the eluent yielding 3e.

Yield: 72% (44.8 mg); white solid; R_f = 0.33 (hexanes/EtOAc 95:5 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.25–7.13 (comp, 10 H), 7.06 (app td, J = 7.4, 1.7 Hz, 1 H), 6.98 (d, J = 7.5 Hz, 1 H), 6.78 (dd, J = 7.9, 1.3 Hz, 1 H), 3.71–3.55 (comp, 3 H), 3.44 (d, J = 17.5 Hz, 1 H), 3.28–3.23 (m, 1 H), 3.17 (ddd, J = 11.8, 8.3, 4.7 Hz, 1 H), 3.09 (app dt, J = 11.9, 5.3 Hz, 1 H), 3.02 (app dt, J = 15.8, 4.8 Hz, 1 H).

¹³C NMR (151 MHz, CDCl₃): δ = 134.5, 134.2, 133.4, 129.8, 128.9, 128.9, 128.4, 128.2, 127.9, 127.8, 126.9, 126.5, 126.4, 126.0, 126.0, 126.0, 62.5, 53.5, 46.5, 36.2, 29.9.

HRMS (ESI): m/z [M + H]⁺ calcd for C₂₃H₂₂N: 312.1747; found: 312.1787. Spectral Accuracy: 97.4%.

1,2,3,5,10,10a-Hexahydropyrrolo[1,2-b]isoquinoline (4)

By following General Procedures A and B, compound (±)-4 was obtained from aldehyde 1a (82.6 mg, 0.5 mmol, 1 equiv) and l-proline (74.8 mg, 0.65 mmol, 1.3 equiv). Dichloromethane containing MeOH (0–10%) was used as the eluent for silica gel chromatography. Characterization data for 4 match a literature report in all respects.[19e]

Yield: 52% (45.0 mg) over two steps; colorless oil; R_f = 0.13 (CH₂Cl₂/ MeOH 96:4 v/v).

¹H NMR (600 MHz, CDCl₃): δ = 7.13–7.10 (comp, 3 H), 7.11–7.05 (m, 1 H), 4.16 (d, J = 14.6 Hz, 1 H), 3.47 (d, J = 14.6 Hz, 1 H), 3.30 (app td, J = 8.7, 2.5 Hz, 1 H), 3.01 (dd, J = 15.9, 3.9 Hz, 1 H), 2.78–2.71 (m, 1 H), 2.42–2.36 (m, 1 H), 2.31 (app q, J = 8.8 Hz, 1 H), 2.12 (dddd, J = 12.3, 9.8, 6.8, 4.2 Hz, 1 H), 1.95 (app ddtd, J = 12.7, 11.2, 8.6, 4.2 Hz, 1 H), 1.89–1.79 (m, 1 H), 1.58 (dddd, J = 12.3, 11.3, 9.8, 6.8 Hz, 1 H).

¹³C NMR (151 MHz, CDCl₃): δ = 135.0, 134.9, 129.1, 126.7, 126.3, 125.8, 60.8, 55.9, 54.8, 36.0, 31.1, 21.7.

HRMS (ESI): m/z [M + H]⁺ calcd for C₁₂H₁₆N: 174.1277; found: 174.1276. Spectral Accuracy: 99.4%.

1,3,4,6,11,11a-Hexahydro-2H-pyrido[1,2-b]isoquinoline (5)

By following General Procedures A and B, compound (±)-5 was obtained from aldehyde 1a (82.6 mg, 0.5 mmol, 1 equiv) and l/d-pipecolic acid (84.0 mg, 0.65 mmol, 1.3 equiv). Dichloromethane containing MeOH (0–4%) was used as the eluent for silica gel chromatography. Characterization data for 5 match a literature report in all respects.[19d]

Yield: 47% (44.0 mg) over two steps; white solid; R_f = 0.18 in EtOAc.

¹H NMR (600 MHz, CDCl₃): δ = 7.12–7.08 (comp, 2 H), 7.06–7.03 (m, 1 H), 7.02–6.98 (m, 1 H), 3.86 (d, J = 15.1 Hz, 1 H), 3.39 (d, J = 15.1 Hz, 1 H), 3.12–3.05 (m, 1 H), 2.90–2.62 (comp, 2 H), 2.25 (app tt, J = 10.2, 4.2 Hz, 1 H), 2.12 (app td, J = 11.4, 4.2 Hz, 1 H), 1.88–1.76 (comp, 2 H), 1.76–1.67 (comp, 2 H), 1.42–1.32 (comp, 2 H).

¹³C NMR (151 MHz, CDCl₃): δ = 134.3, 134.0, 128.1, 126.2, 126.0, 125.6, 58.4, 58.4, 56.2, 36.8, 33.7, 25.9, 24.3.

HRMS (ESI): m/z [M + H]⁺ calcd for C₁₃H₁₈N: 188.1434; found: 188.1383. Spectral Accuracy: 99.2%.

Acknowledgment

We thank Dr. Ion Ghiviriga (University of Florida) for assistance with NMR experiments.

• References


Selected recent reviews on amine C–H functionalization, including redox-neutral approaches:
• 1a Campos KR. Chem. Soc. Rev. 2007; 36: 1069
• 1b Jazzar R, Hitce J, Renaudat A, Sofack-Kreutzer J, Baudoin O. Chem. Eur. J. 2010; 16: 2654
• 1c Yeung CS, Dong VM. Chem. Rev. 2011; 111: 1215
• 1d Mitchell EA, Peschiulli A, Lefevre N, Meerpoel L, Maes BU. W. Chem. Eur. J. 2012; 18: 10092
• 1e Jones KM, Klussmann M. Synlett 2012; 23: 159
• 1f Peng B, Maulide N. Chem. Eur. J. 2013; 19: 13274
• 1g Girard SA, Knauber T, Li C.-J. Angew. Chem. Int. Ed. 2014; 53: 74
• 1h Haibach MC, Seidel D. Angew. Chem. Int. Ed. 2014; 53: 5010
• 1i Wang L, Xiao J. Adv. Synth. Catal. 2014; 356: 1137
• 1j Vo C.-VT, Bode JW. J. Org. Chem. 2014; 79: 2809
• 1k Seidel D. Org. Chem. Front. 2014; 1: 426
• 1l Qin Y, Lv J, Luo S. Tetrahedron Lett. 2014; 55: 551
• 1m Seidel D. Acc. Chem. Res. 2015; 48: 317
• 1n Beatty JW, Stephenson CR. J. Acc. Chem. Res. 2015; 48: 1474
• 1o Mahato S, Jana CK. Chem. Rec. 2016; 16: 1477
• 1p Qin Y, Zhu L, Luo S. Chem. Rev. 2017; 117: 9433
• 1q Cheng M.-X, Yang S.-D. Synlett 2017; 28: 159
• 1r Chu JC. K, Rovis T. Angew. Chem. Int. Ed. 2018; 57: 62
• 1s Gonnard L, Guérinot A, Cossy J. Tetrahedron 2019; 75: 145
• 1t Liu S, Zhao Z, Wang Y. Chem. Eur. J. 2019; 25: 2423
• 1u Antermite D, Bull JA. Synthesis 2019; 51: 3171
• 1v Trowbridge A, Walton SM, Gaunt MJ. Chem. Rev. 2020; 120: 2613

Recent examples of mechanistically diverse amine C–H bond functionalization reactions:
• 2a Zhao Z, Luo Y, Liu S, Zhang L, Feng L, Wang Y. Angew. Chem. Int. Ed. 2018; 57: 3792
• 2b Wang F, Rafiee M, Stahl SS. Angew. Chem. Int. Ed. 2018; 57: 6686
• 2c Greßies S, Klauck FJ. R, Kim JH, Daniliuc CG, Glorius F. Angew. Chem. Int. Ed. 2018; 57: 9950
• 2d Griffiths RJ, Kong WC, Richards SA, Burley GA, Willis MC, Talbot EP. A. Chem. Sci. 2018; 9: 2295
• 2e Idiris FI. M, Majeste CE, Craven GB, Jones CR. Chem. Sci. 2018; 9: 2873
• 2f Li S.-S, Lv X, Ren D, Shao C.-L, Liu Q, Xiao J. Chem. Sci. 2018; 9: 8253
• 2g Maier AF. G, Tussing S, Zhu H, Wicker G, Tzvetkova P, Flörke U, Daniliuc CG, Grimme S, Paradies J. Chem. Eur. J. 2018; 24: 16287
• 2h Mori K, Isogai R, Kamei Y, Yamanaka M, Akiyama T. J. Am. Chem. Soc. 2018; 140: 6203
• 2i Shang M, Chan JZ, Cao M, Chang Y, Wang Q, Cook B, Torker S, Wasa M. J. Am. Chem. Soc. 2018; 140: 10593
• 2j Lennox AJ. J, Goes SL, Webster MP, Koolman HF, Djuric SW, Stahl SS. J. Am. Chem. Soc. 2018; 140: 11227
• 2k Zhang J, Park S, Chang S. J. Am. Chem. Soc. 2018; 140: 13209
• 2l Nauth AM, Schechtel E, Dören R, Tremel W, Opatz T. J. Am. Chem. Soc. 2018; 140: 14169
• 2m Jiang H.-J, Zhong X.-M, Yu J, Zhang Y, Zhang X, Wu Y.-D, Gong L.-Z. Angew. Chem. Int. Ed. 2019; 58: 1803
• 2n Ashley MA, Yamauchi C, Chu JC. K, Otsuka S, Yorimitsu H, Rovis T. Angew. Chem. Int. Ed. 2019; 58: 4002
• 2o Guin S, Dolui P, Zhang X, Paul S, Singh VK, Pradhan S, Chandrashekar HB, Anjana SS, Paton RS, Maiti D. Angew. Chem. Int. Ed. 2019; 58: 5633
• 2p Whitehurst WG, Blackwell JH, Hermann GN, Gaunt MJ. Angew. Chem. Int. Ed. 2019; 58: 9054
• 2q Ma Y, Yao X, Zhang L, Ni P, Cheng R, Ye J. Angew. Chem. Int. Ed. 2019; 58: 16548
• 2r Grainger R, Heightman TD, Ley SV, Lima F, Johnson CN. Chem. Sci. 2019; 10: 2264
• 2s Vasu D, Fuentes de Arriba AL, Leitch JA, de Gombert A, Dixon DJ. Chem. Sci. 2019; 10: 3401
• 2t Asako S, Ishihara S, Hirata K, Takai K. J. Am. Chem. Soc. 2019; 141: 9832
• 2u Lin W, Zhang K.-F, Baudoin O. Nat. Catal. 2019; 2: 882
• 2v Chan JZ, Chang Y, Wasa M. Org. Lett. 2019; 21: 984
• 2w Zhou L, Shen Y.-B, An X.-D, Li X.-J, Li S.-S, Liu Q, Xiao J. Org. Lett. 2019; 21: 8543
• 2x Kataoka M, Otawa Y, Ido N, Mori K. Org. Lett. 2019; 21: 9334
• 2y Lee M, Adams A, Cox PB, Sanford MS. Synlett 2019; 30: 417
• 2z Kapoor M, Chand-Thakuri P, Maxwell JM, Liu D, Zhou H, Young MC. Synlett 2019; 30: 519
• 2aa Ohmatsu K, Suzuki R, Furukawa Y, Sato M, Ooi T. ACS Catal. 2020; 10: 2627
• 2ab Roque JB, Kuroda Y, Jurczyk J, Xu L.-P, Ham JS, Göttemann LT, Roberts CA, Adpressa D, Saurí J, Joyce LA, Musaev DG, Yeung CS, Sarpong R. ACS Catal. 2020; 10: 2929
• 2ac Rand AW, Yin H, Xu L, Giacoboni J, Martin-Montero R, Romano C, Montgomery J, Martin R. ACS Catal. 2020; 10: 4671
• 2ad Liu W, Babl T, Röther A, Reiser O, Davies HM. L. Chem. Eur. J. 2020; 26: 4236
• 2ae Verma P, Richter JM, Chekshin N, Qiao JX, Yu J.-Q. J. Am. Chem. Soc. 2020; 142: 5117
• 2af Walker MM, Koronkiewicz B, Chen S, Houk KN, Mayer JM, Ellman JA. J. Am. Chem. Soc. 2020; 142: 8194
• 2ag Feng K, Quevedo RE, Kohrt JT, Oderinde MS, Reilly U, White MC. Nature 2020; 580: 621
• 2ah Sarver PJ, Bacauanu V, Schultz DM, DiRocco DA, Lam Y.-h, Sherer EC, MacMillan DW. C. Nat. Chem. 2020; 12: 459
• 2ai McManus JB, Onuska NP. R, Jeffreys MS, Goodwin NC, Nicewicz DA. Org. Lett. 2020; 22: 679
• 2aj Oeschger R, Su B, Yu I, Ehinger C, Romero E, He S, Hartwig J. Science 2020; 368: 736
• 2ak Short MA, Blackburn JM, Roizen JL. Synlett 2020; 31: 102
• 3a Zhang C, De C K, Mal R, Seidel D. J. Am. Chem. Soc. 2008; 130: 416
• 3b Zheng L, Yang F, Dang Q, Bai X. Org. Lett. 2008; 10: 889
• 3c Dieckmann A, Richers MT, Platonova AY, Zhang C, Seidel D, Houk KN. J. Org. Chem. 2013; 78: 4132
• 3d Richers MT, Deb I, Platonova AY, Zhang C, Seidel D. Synthesis 2013; 45: 1730
• 4a Richers MT, Breugst M, Platonova AY, Ullrich A, Dieckmann A, Houk KN, Seidel D. J. Am. Chem. Soc. 2014; 136: 6123
• 4b Jarvis CL, Richers MT, Breugst M, Houk KN, Seidel D. Org. Lett. 2014; 16: 3556
• 4c Mahato S, Haque MA, Dwari S, Jana CK. RSC Adv. 2014; 4: 46214
• 5a Ma L, Seidel D. Chem. Eur. J. 2015; 21: 12908
• 5b Paul A, Chandak HS, Ma L, Seidel D. Org. Lett. 2020; 22: 976
• 6a Li J, Qin C, Yu Y, Fan H, Fu Y, Li H, Wang W. Adv. Synth. Catal. 2017; 359: 2191
• 6b Li J, Fu Y, Qin C, Yu Y, Li H, Wang W. Org. Biomol. Chem. 2017; 15: 6474
• 6c Zhu Z, Seidel D. Org. Lett. 2017; 19: 2841
• 7 Paul A, Adili A, Seidel D. Org. Lett. 2019; 21: 1845

Additional examples of amine redox-annulations:
• 8a Zhang C, Das D, Seidel D. Chem. Sci. 2011; 2: 233
• 8b Kang Y, Chen W, Breugst M, Seidel D. J. Org. Chem. 2015; 80: 9628
• 8c Chen W, Seidel D. Org. Lett. 2016; 18: 1024
• 8d Zhu Z, Lv X, Anesini JE, Seidel D. Org. Lett. 2017; 19: 6424
• 8e Zhu Z, Chandak HS, Seidel D. Org. Lett. 2018; 20: 4090
• 8f Liu Y, Wu J, Jin Z, Jiang H. Synlett 2018; 29: 1061

For detailed discussions on the mechanisms of these transformations, see references:
• 9a Xue X, Yu A, Cai Y, Cheng J.-P. Org. Lett. 2011; 13: 6054
• 9b Ma L, Paul A, Breugst M, Seidel D. Chem. Eur. J. 2016; 22: 18179 ; see also refs 1m, 3c, 4a, 4b, and 8b

Examples of redox-neutral α-C–H bond annulations of secondary amines that likely involve a pericyclic step:
• 10a Grigg R, Nimal Gunaratne HQ, Henderson D, Sridharan V. Tetrahedron 1990; 46: 1599
• 10b Soeder RW, Bowers K, Pegram LD, Cartaya-Marin CP. Synth. Commun. 1992; 22: 2737
• 10c Grigg R, Kennewell P, Savic V, Sridharan V. Tetrahedron 1992; 48: 10423
• 10d Deb I, Seidel D. Tetrahedron Lett. 2010; 51: 2945
• 10e Kang Y, Richers MT, Sawicki CH, Seidel D. Chem. Commun. 2015; 51: 10648
• 10f Cheng Y.-F, Rong H.-J, Yi C.-B, Yao J.-J, Qu J. Org. Lett. 2015; 17: 4758
• 10g Yang Z, Lu N, Wei Z, Cao J, Liang D, Duan H, Lin Y. J. Org. Chem. 2016; 81: 11950
• 10h Rong H.-J, Cheng Y.-F, Liu F.-F, Ren S.-J, Qu J. J. Org. Chem. 2017; 82: 532
• 10i Purkait A, Roy SK, Srivastava HK, Jana CK. Org. Lett. 2017; 19: 2540
• 11a Chrzanowska M, Rozwadowska MD. Chem. Rev. 2004; 104: 3341
• 11b Grycova L, Dostal J, Marek R. Phytochemistry 2007; 68: 150
• 11c Bhadra K, Kumar GS. Med. Res. Rev. 2011; 31: 821
• 11d Yu J, Zhang Z, Zhou S, Zhang W, Tong R. Org. Chem. Front. 2018; 5: 242
• 12a Enders D, Wang C, Bats JW. Synlett 2009; 1777
• 12b Enders D, Hahn R, Atodiresei I. Adv. Synth. Catal. 2013; 355: 1126
• 12c Hahn R, Jafari E, Raabe G, Enders D. Synthesis 2015; 47: 472
• 13 Fessard TC, Motoyoshi H, Carreira EM. Angew. Chem. Int. Ed. 2007; 46: 2078
• 14 Ono N, Miyake H, Kamimura A, Hamamoto I, Tamura R, Kaji A. Tetrahedron 1985; 41: 4013

Decarboxylative annulations:
• 15a Cohen N, Blount JF, Lopresti RJ, Trullinger DP. J. Org. Chem. 1979; 44: 4005
• 15b Tang M, Tong L, Ju L, Zhai W, Hu Y, Yu X. Org. Lett. 2015; 17: 5180
• 15c Kang Y, Seidel D. Org. Lett. 2016; 18: 4277
• 15d Wu J.-s, Jiang H.-j, Yang J.-g, Jin Z.-n, Chen D.-b. Tetrahedron Lett. 2017; 58: 546
• 15e Paul A, Thimmegowda NR, Galani Cruz T, Seidel D. Org. Lett. 2018; 20: 602 ; see also references 3a, 3b, 3d, 5b, 6c, 8a, 8e, and 14.

Selected reviews on decarboxylative coupling reactions not limited to amino acids:
• 16a Rodriguez N, Goossen LJ. Chem. Soc. Rev. 2011; 40: 5030
• 16b Xuan J, Zhang Z.-G, Xiao W.-J. Angew. Chem. Int. Ed. 2015; 54: 15632
• 16c Patra T, Maiti D. Chem. Eur. J. 2017; 23: 7382
• 16d Wei Y, Hu P, Zhang M, Su W. Chem. Rev. 2017; 117: 8864
• 16e Rahman M, Mukherjee A, Kovalev IS, Kopchuk DS, Zyryanov GV, Tsurkan MV, Majee A, Ranu BC, Charushin VN, Chupakhin ON, Santra S. Adv. Synth. Catal. 2019; 361: 2161
• 17a Kind T, Fiehn O. BMC Bioinformatics 2007; 8: 105
• 17b Wang Y, Gu M. Anal. Chem. 2010; 82: 7055

Starting material synthesis:
• 18a Ghislieri D, Green AP, Pontini M, Willies SC, Rowles I, Frank A, Grogan G, Turner NJ. J. Am. Chem. Soc. 2013; 135: 10863
• 18b Gray NM, Cheng BK, Mick SJ, Lair CM, Contreras PC. J. Med. Chem. 1989; 32: 1242
• 18c Ji Y, Wang J, Chen M, Shi L, Zhou Y. Chin. J. Chem. 2018; 36: 139
• 18d Tamayo NA, Bo Y, Gore V, Ma V, Nishimura N, Tang P, Deng H, Klionsky L, Lehto SG, Wang W, Youngblood B, Chen J, Correll TL, Bartberger MD, Gavva NR, Norman MH. J. Med. Chem. 2012; 55: 1593
• 18e Ji Y, Shi L, Chen M.-W, Feng G.-S, Zhou Y.-G. J. Am. Chem. Soc. 2015; 137: 10496
• 18f Zhao Z, Sun Y, Wang L, Chen X, Sun Y, Lin L, Tang Y, Li F, Chen D. Tetrahedron Lett. 2019; 60: 800
• 18g Schönbauer D, Sambiagio C, Noël T, Schnürch M. Beilstein J. Org. Chem. 2020; 16: 809
• 18h Cutter PS, Miller R, Schore NE. Tetrahedron 2002; 58: 1471
• 18i Bailey DM, Degrazia CG, Lape HE, Frering R, Fort D, Skulan T. J. Med. Chem. 1973; 16: 151
• 18j See also ref 12b.
• 19a Kraus GA, Wu TA. Tetrahedron 2010; 66: 569
• 19b Dai-Ho G, Mariano PS. J. Org. Chem. 1988; 53: 5113
• 19c Orito K, Satoh Y, Nishizawa H, Harada R, Tokuda M. Org. Lett. 2000; 2: 2535
• 19d Azzena U. J. Chem. Soc., Perkin Trans. 1 2002; 360
• 19e Lahm G, Stoye A, Opatz T. J. Org. Chem. 2012; 77: 6620

Publikationsverlauf

Eingereicht: 12. November 2020

Angenommen nach Revision: 04. Dezember 2020

Artikel online veröffentlicht:
16. Dezember 2020