CC BY-NC-ND 4.0 · International Journal of Recent Surgical and Medical Sciences 2021; 07(01): 003-007
DOI: 10.1055/s-0041-1730092
Review Article

How to Assess Proximal Femoral Shortening after Nailing of Proximal Femoral Fractures? A Short Review

1  Orthopaedic Department, Qena Faculty of Medicine and University Hospital, South Valley University, Qena, Egypt
,
Mohammed Khaled
1  Orthopaedic Department, Qena Faculty of Medicine and University Hospital, South Valley University, Qena, Egypt
,
Ahmed S. El-Hawary
2  Qena Faculty of Medicine, South Valley University, Qena, Egypt
,
Ahmed M. Ahmed
1  Orthopaedic Department, Qena Faculty of Medicine and University Hospital, South Valley University, Qena, Egypt
› Author Affiliations
Funding None.
 

Abstract

Proximal femoral fractures (PFFs) are considered one of the most frequent situations faced by orthopaedic surgeons. Many lines of management had been described. Although management of PFFs with cephalomedullary nails (CMNs) is now considered the gold standard with many mechanical and biological advantages, this technique may have some disadvantages such as residual peritrochanteric pain, limping, limited walking distance, and difficulty with stairs. These complications may be attributed to fracture malreduction with shortening, which may result in either malunion or nonunion and ultimately implant failure. The resultant proximal femoral shortening (PFS) with alteration of the proximal femoral mechanics may affect both the hip abductor function and the daily patient activities. The purpose of this short review is to discuss the assessment and secondary effects of PFS after treating femoral fractures with CMNs.


#

Introduction

Proximal femoral fractures (PFFs) frequently occur in the elderly population,[1] which represent a medical and socioeconomic burden, with a reported global annual incidence of approximately 1.3 million.[2] This number is predicted to increase to about 6 million by the year 2050.[3] Using cephalomedullary nails (CMNs) or the so-called proximal femoral nails (PFNs) for treating these fractures became the gold standard approach since its introduction in the 1980s.[4] [5] [6] The minimal invasiveness of the procedure, early weight-bearing, the relative simplicity of the surgery, and theoretical mechanical advantages are considered the main benefits of using these devices.[7] [8]

However, employing these devices has some complications, which may be considered serious, including iatrogenic neck of femur fractures, comminution and displacement of the trochanteric area, distortion of the proximal femoral anatomy, femoral head osteonecrosis, and residual symptoms.[9] [10] Persistent postoperative complaints such as residual peritrochanteric pain, limping, limited walking distance, and difficulty with stairs may be attributed to fracture malreduction, which may result in either malunion or nonunion and ultimate implant failure.[11] [12]

Proximal femoral shortening (PFS) is a frequent finding after internal fixation of PFFs using CMNs, which may contribute to postoperative limping and walking limitation.[13] [14] Several reports have demonstrated an association between PFS and reduced postoperative physical activity in these patients.[15] [16] Furthermore, PFS has been shown to have a negative effect on gait velocity, in addition to causing gait symmetry.[15] According to Zlowodzki et al,[14] [16] most surgeons believe that PFS adversely affects the hip abductors’ function and hip mobility and eventually cause a deficiency in patients’ physical activity. Additionally, the resultant leg length discrepancy (LLD) may affect the spine, pelvis, and joints of the lower limbs.[17]


#

Radiological Assessment of PFFs after Management Using PFNs

On a proper anteroposterior (AP) view of the pelvis showing both sides with a known magnification of the X-ray or the presence of calibration (like a coin), evaluation is done as proposed by Paul et al,[18] where they used the following approach (six steps for both sides on the AP X-ray) ([Fig. 1]):

Zoom Image
Fig. 1 Preliminary landmarks on AP pelvis radiographs showing both hips (C: center of the femoral head; F: the anatomical axis of the femur; B: the path of the abductor muscles; N: femoral neck axis).
  • Step 1: Define the shaft axis (F) by establishing two midpoints within the medullary canal. The first point is as distal on the X-ray as possible, and the other point is at the level of the distal margin of the lesser trochanter. Both points are connected with a line.

  • Step 2: Define the femoral head center (C) by establishing the best-fitting circle over the femoral head. The circle center will be the femoral head center.

  • Step 3: Identify the adjustment for leg rotation by measuring the length of the lag screw on the X-ray; then, compare this with the known lag screw length.

  • Step 4: A line is then drawn from the femoral head center (C) to the two points located at the midpoint of the neck; this line represents the axis of the femoral neck (N).

  • Step 5: A line is drawn tangential to the greater trochanter along with the shadow of the abductors, which represents the path of the abductor muscles (B).

  • Step 6: Compare all the measurements with the healthy contralateral side.


#

What Should Be Measured?

  • Femoral offset ([Fig. 2A]) is the length of a line from the femoral head center (C) passing perpendicular to the long axis of the femur (F). This measurement should be adjusted according to the determined leg rotation mentioned in step 3. The average offset ranges from 41 to 44 mm and is related to the size of the femur.[19]

    • Abductor lever arm ([Fig. 2B]) is the length of a line drawn from the femoral head center (C) to intersect the line of the path of the hip abductor muscles (B) at 90°.[20]

    • Neck–shaft angle (NSA) ([Fig. 3A]) is defined as the angle between the long axis of the femoral shaft (F) and the long axis of the femoral neck (N). NSA is also known as the angle of the femoral neck. Normal NSA varies between 120° and 140°.[21]

    • Proximal femoral varusis defined as NSA of less than 120°, while femoral neck varus collapse is defined as a decrease in NSA greater than 10° compared with the healthy contralateral side.[14] [16]

    • Lag screw telescoping ([Fig. 3B]) is measured as the outer prominence of the lag screw from the edge of the nail or the lateral femoral cortex if intact (this value should be compared with the measurements recorded from the follow-up radiographs).[18]

    • Leg length discrepancy (LLD) ([Fig. 4A]) is the distance from an identical point on the lesser trochanter on both sides to a fixed reference line (trans-teardrop line or trans-ischial line).

    • Tip apex distance ([Fig. 4B]) is the sum of the distance measured on both an AP radiograph and a lateral radiograph from the lag screw tip to the femoral head apex, after controlling for X-ray magnification.[22]

Zoom Image
Fig. 2 Assessment of the femoral offset and the abductor lever arm. (A) Femoral offset: measured as the length of a line from the center of rotation of the femoral head (C) passing perpendicular to the long axis of the femur (F). (B) Abductor lever arm compared on both sides: the length of a line from the center of the femoral head (C) is drawn to intersect the line of the path of the abductor muscles (B) at 90.
Zoom Image
Fig. 3 Assessment of the femoral neck–shaft angle (NSA) and the presence of telescoping of the lag screw. (A) Femoral NSA: the angle between the long axis of the femoral shaft (F) and long axis femoral neck (N). (B) Telescoping of the lag screw: measured as the lateral prominence of the lag screw to the edge of the nail.
Zoom Image
Fig. 4 Assessment of the leg length discrepancy and the tip apex distance. (A) Overall leg length discrepancy (LLD): the distance from an identical point on the lesser trochanter (LT) on both sides to a fixed reference line (trans-teardrop line*). (B) Tip apex distance (TAD) of the lag screw: the sum of the distance from the tip of the lag screw to the apex of the femoral head on an anteroposterior radiograph and this distance on a lateral radiograph.

#

Discussion

The collapse of a comminuted intertrochanteric fracture usually occurs once the patient starts early weight-bearing, and this is considered one of the leading causes of PFS. Healing in this shortening position will affect both the hip offset and the abductor lever arm.[23] [24] [25] [26] [27]

PFS leading to a distorted trochanteric–hip biomechanical relationship will negatively affect abductor muscle strength and may lead to persistent gait parameters deficiency. The effect of these biomechanical changes was described in details in the hip arthroplasty literature.[20] [28] [29]

Paul et al measured shortening as the lag screw telescoping through the lateral femoral cortex and the measured lag screw tip movement inside the femoral head. In their series, they found that the average lag screw telescoping through the proximal femur lateral cortex was approximately 3.3 mm in an unstable fracture group and approximately 1.2 mm in a stable fracture group. The average lag screw tip migration inside the femoral head was 1.7 mm. They concluded that proper fracture reduction and fixation would lead to the restoration of the hip biomechanics, which is mandatory for better functional outcomes.[18]

Gilat et al, in their study investigating the effect of PFS on the patient’s functional outcomes, found that 43.5% of the patients experienced PFS that ranged from 5 to 9.9 mm, while in 17% the shortening was more than 10 mm. They concluded that PFS commonly occurs after intertrochanteric hip fractures fixation using CMNs, and this shortening is closely related to poor functional outcomes as well as early implant failure.[30]

McGrory et al[28] stated that femoral offset restoration and preservation of the abductor lever arm are correlated positively with the hip abduction strength as well as the range.

If the PFS is significant enough to cause a notable LLD, it may lead to secondary effects on the spine, causing compensatory scoliosis, which will aggravate further degenerative changes and low back pain.[31] On contralateral hip and both knees, it may lead to asymmetric weight and force distribution on the joints, which may lead to degenerative changes.[17]


#

Conclusion

The use of CMNs is considered the gold standard to treat PFFs. Although it has many advantages, alteration of proximal femoral mechanics is one of the common complications, especially PFS. Great care should be taken during surgery to restore the femoral length as well as to preserve the proximal femur biomechanics in comparison to the healthy side.


#
#

Conflict of Interest

None declared.


Address for correspondence

Ahmed A. Khalifa, MD, FRCS, MSc
Orthopaedic Department, Qena Faculty of Medicine and University Hospital
South Valley University, Kilo 6 Qena-Safaga Highway, Qena 83523
Egypt   

Publication History

Publication Date:
14 May 2021 (online)

© 2021. Medical and Surgical Update Society. This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial-License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/).

Thieme Medical and Scientific Publishers Pvt. Ltd.
A-12, 2nd Floor, Sector 2, Noida-201301 UP, India


Zoom Image
Fig. 1 Preliminary landmarks on AP pelvis radiographs showing both hips (C: center of the femoral head; F: the anatomical axis of the femur; B: the path of the abductor muscles; N: femoral neck axis).
Zoom Image
Fig. 2 Assessment of the femoral offset and the abductor lever arm. (A) Femoral offset: measured as the length of a line from the center of rotation of the femoral head (C) passing perpendicular to the long axis of the femur (F). (B) Abductor lever arm compared on both sides: the length of a line from the center of the femoral head (C) is drawn to intersect the line of the path of the abductor muscles (B) at 90.
Zoom Image
Fig. 3 Assessment of the femoral neck–shaft angle (NSA) and the presence of telescoping of the lag screw. (A) Femoral NSA: the angle between the long axis of the femoral shaft (F) and long axis femoral neck (N). (B) Telescoping of the lag screw: measured as the lateral prominence of the lag screw to the edge of the nail.
Zoom Image
Fig. 4 Assessment of the leg length discrepancy and the tip apex distance. (A) Overall leg length discrepancy (LLD): the distance from an identical point on the lesser trochanter (LT) on both sides to a fixed reference line (trans-teardrop line*). (B) Tip apex distance (TAD) of the lag screw: the sum of the distance from the tip of the lag screw to the apex of the femoral head on an anteroposterior radiograph and this distance on a lateral radiograph.