Subscribe to RSS
DOI: 10.1055/s-0043-124214
Langzeitbewährung neuer Chairside gefräster CAD/CAM-Hybridkeramiken – eine In-vitro-Studie im Kausimulator
Long-Term Analysis of New CAD/CAM Ceramic-Resins for Chairside Milling – An In Vitro Study Using a Chewing SimulatorPublication History
Publication Date:
27 February 2018 (online)
Zusammenfassung
Ziel dieser In-vitro-Studie war es, das Abrasions- und Bruchverhalten von Chairside gefrästen Hybridkeramiken nach der künstlichen Alterung im Kausimulator zu untersuchen und mögliche Vor- und Nachteile gegenüber konventionellen Keramiken aufzuzeigen. Es kann gesagt werden, dass Materialien, die eine hohe Eigenabrasion (Lava Ultimate) aufwiesen, eine entsprechend geringere Abrasion am Antagonisten zeigten. Dies spielt bei Patienten die unter Parafunktion leiden, wie z. B. Bruxismus, eine wichtige Rolle bei der Auswahl des entsprechenden Restaurationsmaterials.
Abstract
The purpose of this in vitro study was to evaluate the abrasion rate and fracture strength of chairside milled new resin-ceramics after artificial aging in a chewing simulator and also to show their pros and cons in comparison to conventional ceramics. It can be concluded that materials, which showed a high abrasion rate by themselves (Lava Ultimate, 353.16 µm) caused an accordingly lower abrasion rate at the opposing teeth. These are important facts for patients with parafunctions, e.g. bruxism, to choose the right material for dental restauration.
-
Literatur
- 1 Belli R, Petschelt A, Hofner B. et al. Fracture rates and lifetime estimations of CAD/CAM all-ceramic restorations. J Dent Res 2016; 95: 67-73
- 2 Awada A, Nathanson D. Mechanical properties of resin-ceramic CAD/CAM restorative materials. J Prosthet Dent 2015; 114: 587-593
- 3 Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 2013; 29: 419-426
- 4 Zahran M, El-Mowafy O, Tam L. et al. Fracture strength and fatigue resistance of all-ceramic molar crowns manufactured with CAD/CAM technology. J Prosthodont 2008; 17: 370-377
- 5 Etman MK. Confocal examination of subsurface cracking in ceramic materials. J Prosthodont 2009; 18: 550-559
- 6 Stawarczyk B, Frevert K, Ender A. et al. Comparison of four monolithic zirconia materials with conventional ones: Contrast ratio, grain size, four-point flexural strength and two-body wear. J Mech Behav Biomed Mater 2016; 59: 128-138
- 7 Ruse ND, Sadoun MJ. Resin-composite blocks for dental CAD/CAM applications. J Dent Res 2014; 93: 1232-1234
- 8 Swain MV, Coldea A, Bilkhair A. et al. Interpenetrating network ceramic-resin composite dental restorative materials. Dent Mater 2016; 32: 34-42
- 9 DʼArcangelo C, Vanini L, Rondoni GD. et al. Wear properties of dental ceramics and porcelains compared with human enamel. J Prosthet Dent 2016; 115: 350-355
- 10 Mörmann WH, Stawarczyk B, Ender A. et al. Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness. J Mech Behav Biomed Mater 2013; 20: 113-125
- 11 Passos SP, de Freitas AP, Iorgovan G. et al. Enamel wear opposing different surface conditions of different CAD/CAM ceramics. Quintessence Int 2013; 44: 743-751
- 12 Stawarczyk B, Liebermann A, Eichberger M. et al. Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites. J Mech Behav Biomed Mater 2015; 55: 1-11