Subscribe to RSS
DOI: 10.1055/s-0040-1710072
The Role of Pedicle Screw Surface on Insertion Torque and Pullout Strength[∗]
Article in several languages: português | English
Abstract
Objective Compare by mechanical tests the pullout resistance and the insertion torque of rough and smooth pedicle screws.
Methods Pedicle screws with rough surface and smooth surface, with diameters of 4.8; 5.5 and 6.5 mm, were inserted in polyurethane blocks with density of 10 PCF (0.16 g/cm3). Insertion torque and pullout strength were assessed.
Results The pullout strength of the rough surface and smooth surface screws did not differ, except in the group of 4.8 mm diameter screws. In this group, the rough surface screws showed greater resistance to pullout.
Conclusion Pedicle screws with a rough surface did not show increased pullout resistance in the acute phase of their insertion in polyurethane blocks compared to smooth surface screws. The rough surface screws had a higher insertion torque than the smooth surface screws, depending on the diameter of the screw and the preparation of the pilot hole.
Authors' Declaration of Contribution
Each author contributed individually and significantly to the development of this article. Fleury R. B. C. (0000–0001–7643–6466) *: Substantial contributions to the conception and design of the work, acquisition and interpretation of data for the work and final approval of the version to be published; Shimano A. C.(0000–0002–3119–2362) *: contribution to data collection, analysis and final approval; Matos T. D. (0000–0003–3853–502X) *: contribution to data collection and analysis; Teixeira K. O. (0000–0002–8165–2427) *: contribution to data collection and analysis; Romero V (0000–0002–3278–5223) *: review for important intellectual content; Defino H. L. A. (0000–0003–4274–0130) *: Substantial contributions to the conception and design of the work, contributions to the analysis and interpretation of data for the work and final approval of the version to be published.
∗ Work developed in the Department of Biomechanics, Medicine and Rehabilitation of the Locomotor System, Ribeirão Preto Medical School, Universidade de São Paulo, Ribeirão Preto, SP, Brazil.
Publication History
Received: 31 August 2019
Accepted: 20 February 2020
Article published online:
08 June 2020
© 2020. Sociedade Brasileira de Ortopedia e Traumatologia. This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/)
Thieme Revinter Publicações Ltda.
Rua do Matoso 170, Rio de Janeiro, RJ, CEP 20270-135, Brazil
-
Referências
- 1 Shea TM, Laun J, Gonzalez-Blohm SA. et al. Designs and techniques that improve the pullout strength of pedicle screws in osteoporotic vertebrae: current status. Biomed Res Int 2014; 2014: 748393
- 2 De Iure F, Bosco G, Cappuccio M, Paderni S, Amendola L. Posterior lumbar fusion by peek rods in degenerative spine: preliminary report on 30 cases. Eur Spine J 2012; 21 (Suppl. 01) S50-S54
- 3 Zhang QH, Tan SH, Chou SM. Effects of bone materials on the screw pull-out strength in human spine. Med Eng Phys 2006; 28 (08) 795-801
- 4 Hasegawa T, Inufusa A, Imai Y, Mikawa Y, Lim TH, An HS. Hydroxyapatite-coating of pedicle screws improves resistance against pull-out force in the osteoporotic canine lumbar spine model: a pilot study. Spine J 2005; 5 (03) 239-243
- 5 Ong JL, Carnes DL, Bessho K. Evaluation of titanium plasma-sprayed and plasma-sprayed hydroxyapatite implants in vivo. Biomaterials 2004; 25 (19) 4601-4606
- 6 Wiendieck K, Müller H, Buchfelder M, Sommer B. Mechanical stability of a novel screw design after repeated insertion: can the double-thread screw serve as a back up?. J Neurosurg Sci 2018; 62 (03) 271-278
- 7 Wang WT, Guo CH, Duan K. et al. Dual pitch titanium-coated pedicle screws improve initial and early fixation in a polyetheretherketone rod semi-rigid fixation system in sheep. Chin Med J (Engl) 2019; 132 (21) 2594-2600
- 8 Hsu CC, Chao CK, Wang JL. et al. Increase of pullout strength of spinal pedicle screws with conical core: biomechanical tests and finite element analyses. J Orthop Res. 2005; 23: 788-794
- 9 Rosa RC, Silva P, Shimano AC. et al. Análise biomecânica de variáveis relacionadas à resistência ao arrancamento dos parafusos do sistema de fixação vertebral. Rev Bras Ortop 2008; 43 (07) 293-299
- 10 Kueny RA, Kolb JP, Lehmann W, Püschel K, Morlock MM, Huber G. Influence of the screw augmentation technique and a diameter increase on pedicle screw fixation in the osteoporotic spine: pullout versus fatigue testing. Eur Spine J 2014; 23 (10) 2196-2202
- 11 Kim YY, Choi WS, Rhyu KW. Assessment of pedicle screw pullout strength based on various screw designs and bone densities-an ex vivo biomechanical study. Spine J 2012; 12 (02) 164-168
- 12 Schroeder A, van der Zypen E, Stich H, Sutter F. The reactions of bone, connective tissue, and epithelium to endosteal implants with titanium-sprayed surfaces. J Maxillofac Surg 1981; 9 (01) 15-25
- 13 Esses SI, Sachs BL, Dreyzin V. Complications associated with the technique of pedicle screw fixation. A selected survey of ABS members. Spine 1993; 18 (15) 2231-2238
- 14 Upasani VV, Farnsworth CL, Tomlinson T. et al. Pedicle screw surface coatings improve fixation in nonfusion spinal constructs. Spine (Phila Pa 1976) 2009; 34 (04) 335-343