RSS-Feed abonnieren
PDF herunterladen
DOI: 10.1055/s-0041-1732918
The Effect of Incorporation of Cellulose Kenaf Fibers in Composite Resin on Mechanical Properties and Surface Topography Analysis Using Scanning Electron Microscopy
Funding This research project was funded by the Ministry of Education (Malaysia) under Fundamental Research Grant Scheme (FRGS) (203/PPSG/6171207).
Abstract
Objective This study aimed to evaluate the flexural and compressive strength of kenaf-reinforced composite resin as well as analyze the length and diameter of kenaf fibers and their surface topography.
Materials and Methods Kenaf fibers were alkaline treated and wetted with coupling agent. Kenaf-reinforced composite resin was fabricated manually. Specimens for kenaf-reinforced composite resin (Tetric N Flow [Ivoclar Vivadent, Liechtenstein] + 2% kenaf) and control group (Tetric N Flow [Ivoclar Vivadent, Liechtenstein]) were prepared using stainless steel molds with dimension of 25 mm × 2 mm × 2 mm and 6 mm × 4 mm for flexural and compressive strength tests, respectively, and tested using Instron Universal Testing Machine (Shimadzu, Japan). Raw kenaf fibers, treated kenaf fibers, and fractured sample from flexural strength test were analyzed using scanning electron microscopy (SEM) (FEI Quanta FEG 450, United States). Data were analyzed using independent sample t-test. Significant level was set at p < 0.05.
Results Kenaf-reinforced composite resin has a lower flexural and compressive strength than the control group (p < 0.05). SEM analysis revealed the average fibers’ length to be 1.24 mm and diameter ranging from 6.56 to 12.9 μm. The fibers dispersed in composite as single strand or a bundle with a minimal gap between fibers and composite.
Conclusion Flexural and compressive strengths of kenaf-reinforced composite resin were lower than the control group, despite some adaptation between kenaf fibers and composite noted. The fibers’ length and diameter were reasonable for the dispersion in the resin matrix; however, additional treatments of kenaf are required for a favorable result.
Publikationsverlauf
Artikel online veröffentlicht:
11. August 2021
© 2021. European Journal of General Dentistry. This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial-License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/).
Thieme Medical and Scientific Publishers
Thieme Medical and Scientific Publishers Pvt. Ltd. A-12, 2nd Floor, Sector 2, Noida-201301
UP, India
-
References
- 1 Alshali RZ, Salim NA, Sung R, Satterthwaite JD, Silikas N. Qualitative and quantitative characterization of monomers of uncured bulk-fill and conventional resin-composites using liquid chromatography/mass spectrometry. Dent Mater 2015; 31 (06) 711-720
- 2 Huang Q, Garoushi S, Lin Z. et al. Properties of discontinuous S2-glass fiber-particulate-reinforced resin composites with two different fiber length distributions. J Prosthodont Res 2017; 61 (04) 471-479
- 3 Nishino T, Hirao K, Kotera M, Nakamae K, Inagaki H. Kenaf reinforced biodegradable composite. Compos Sci Technol 2003; 63: 1281-1286
- 4 Wambua P, Verpoest J. Natural fibers: can they replace glass in fiber reinforced plastics?. Compos Sci Technol 2003; 63: 1259-1264
- 5 Jawaid M, Abdul Khalil HPS. Cellulosic/synthetic fiber reinforced polymer hybrid composites. Carbohydr Polym 2011; 86: 1-18
- 6 Saba N, Paridah MT, Jawaid M. Mechanical properties of kenaf fiber reinforced polymer composite: A review. Constr Build Mater 2015; 76: 87-96
- 7 Akil HM, Omar MF, Mazuki AA, Safiee S, Ishak ZAM, Abu Bakar A. Kenaf fiber reinforced composites: A review. Mater Des 2011; 32: 4107-4121
- 8 Mohd Edeerozey AM, Md Akil H, Azhar BM, Zainal Ariffin I. Chemical modification of kenaf fibers. Mater Lett 2007; 61: 2023-2025
- 9 Mahjoub R, Mohamad Yatim J, Mohd Sam AR, Hashemi SH. Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications. Constr Build Mater 2014; 55: 103-113
- 10 Shin HK, Jeun JP, Kim HB, Kang PH. Isolation of cellulose fibers from kenaf using electron beam. Radiat Phys Chem 2012; 81: 936-940
- 11 Kargarzadeh H, Ahmad I, Abdullah I, Dufresne A, Zainudin SY, Sheltami RM. Effects of hydrolysis conditions on the morphology, crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibers. Cellulose 2012; 19: 855-866
- 12 Sharba MJ, Leman Z, Sultan MTH, Ishak MR, Azmah Hanim MA. Tensile and compressive properties of woven kenaf/glass sandwich hybrid composites. Int J Polym Sci 2016; 2016: 1-6
- 13 Bajuri F, Mazlana N, Ishak MR, Imatomi J. Flexural and compressive properties of hybrid kenaf/silica nanoparticles in epoxy composite. Procedia Chem 2016; 19: 955-960
- 14 Razavi M, Babatunde OE, Mohamad Yatim J, Razavi M, Mizal Azzmi N. Compressive properties of kenaf/vinylester composite with different fiber volume. Adv Sci Lett 2018; 24: 3894-3897
- 15 Badri M, Sugiman, Aguswandi. Jayadi J. SEM observation on fracture surface of coconut fibers reinforced polyester composite. J Ocean Mechanical Aerospace-Sci Engineering 2017; 40: 22-27
- 16 Mehdikhani M, Gorbatikh L, Verpoest I, Lomov SV. Voids in fiber-reinforced polymer composites: a review on their formation, characteristics, and effects on mechanical performance. J Compos Mater 2019; 53: 1579-1669
- 17 Asumani OML, Reid RG, Paskaramoorthy R. The effects of alkali-silane treatment on the tensile and flexural properties of short fiber non-woven kenaf reinforced polypropylene composites. Compos, Part A Appl Sci Manuf 2012; 43: 1431-1440
- 18 Hashim MY, Mohd Amin A, Faizan Marwah OM. et al. The effect of alkali treatment under various conditions on physical properties of kenaf fiber. J Phys Conf Ser 2017; 914: 1-15
- 19 Gomes A, Goda K, Ohgi J. Effects of alkali treatment to reinforcement on tensile properties of curaua fiber green composites. JSME Int J Ser A 2004; 47: 541-546
- 20 Akhtar MN, Sulong AB, Radzi MKF. et al. Influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications. Prog Nat Sci-Mater 2016; 26: 657-664
- 21 Mohan TP, Kanny K. Mechanical properties and failure analysis of short kenaf fiber reinforced composites processed by resin casting and vacuum infusion methods. Polym Polymer Compos 2018; 26: 189-204
- 22 Hassan A, Mohd Isa MR, Mohd Ishak ZA, Ishak NA, Rahman NA, Md Salleh F. Characterization of sodium hydroxide-treated kenaf fibers for biodegradable composite application. High Perform Polym 2018; 30: 890-899
- 23 Morais JAD, Gadioli R, De Paoli MA. Curaua fiber reinforced high-density polyethylene composites: Effect of impact modifier and fiber loading. Polímeros 2016; 26: 115-122
- 24 Nirmal U, Lau STW, Hashim J. Interfacial adhesion characteristics of kenaf fibers subjected to different polymer matrices and fiber treatments. J Compos 2014; 2014: 1-12
- 25 Osman E, Vakhguelt A, Sbarski I, Mutasher S. Mechanical properties of kenaf - unsaturated polyester composites: effect of fiber treatment and fiber length. Adv Mat Res 2011; 311–313 260-271
- 26 Capela C, Oliveira SE, Pestanaa J, Ferreira JAM. Effect of fiber length on the mechanical properties of high dosage carbon reinforced. Procedia Struct Integr 2017; 5: 539-546
- 27 Venkateshwaran N, Elayaperumal A, Jagatheeshwaran MS. Effect of fiber length and fiber content on mechanical properties of banana fiber/epoxy composite. J Reinf Plast Compos 2011; 30: 1621-1627
- 28 Okoli OI, Smith GF. Failure modes of fiber reinforced composites: the effects of strain rate and fiber content. J Mater Sci 1998; 33: 5415-5422
- 29 Tan Y, Wang X, Wu D. Preparation, microstructures, and properties of long-glass-fiber-reinforced thermoplastic composites based on polycarbonate/poly (butylene terephthalate) alloys. J Reinf Plast Compos 2015; 34: 1804-1820