CC BY-NC-ND 4.0 · Semin Hear
DOI: 10.1055/s-0044-1786522
Review Article

Chapter 3: Setting the Hearing Aid Response and Verifying Signal Processing and Features in the Test Box

Catherine Palmer
1   Communication Science and Disorders, University of Pittsburgh Medical School, Pittsburgh, Pennsylvania
,
Lori Zitelli
1   Communication Science and Disorders, University of Pittsburgh Medical School, Pittsburgh, Pennsylvania
› Institutsangaben

Abstract

The test box can be used for fitting hearing aids (verifying audibility for the individual), for setting and fine-tuning specific signal processing (e.g., directional microphones, noise reduction, frequency lowering, telecoil responses), and for setting the response for specific accessories (e.g., remote microphones). If you have selected these features for your patient, it is important to make sure they are working properly and turned on. In addition, these tests can help you address specific patient complaints. Let us start by using the test box to pre-set a hearing aid and then we will move on to speech tests of signal processing and features.



Publikationsverlauf

Artikel online veröffentlicht:
17. Mai 2024

© 2024. The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/)

Thieme Medical Publishers, Inc.
333 Seventh Avenue, 18th Floor, New York, NY 10001, USA