Synlett 2012; 23(15): 2183-2188
DOI: 10.1055/s-0032-1317020
letter
© Georg Thieme Verlag Stuttgart · New York

Diversity-Oriented Approach to Macrocyclic Cyclophane Derivatives via Ring-Closing Metathesis[ 1 ]

Sambasivarao Kotha*
Department of Chemistry, Indian Institute of Technology-Bombay, Powai, Mumbai 400 076, India, Fax: +91(22)25723480   Email: srk@chem.iitb.ac.in
,
Mukesh E. Shirbhate
Department of Chemistry, Indian Institute of Technology-Bombay, Powai, Mumbai 400 076, India, Fax: +91(22)25723480   Email: srk@chem.iitb.ac.in
› Author Affiliations
Further Information

Publication History

Received: 04 May 2012

Accepted after revision: 10 July 2012

Publication Date:
31 August 2012 (online)


Dedicated to Professor Mariappan Periasamy on the occasion of his 60th birthday.

Abstract

A short synthetic approach to the macrocyclic framework of longithorone C is described via ring-closing metathesis using the Grubbs 2nd generation catalyst.

 
  • References and Notes

  • 1 A portion of this work has been presented at the 19th International Symposium on Olefin Metathesis and Related Chemistry (ISOM XIX), July 10, 2011, Rennes, France.
    • 2a Fu X, Hossain MB, van der Helm D, Schmitz FJ. J. Am. Chem. Soc. 1994; 116: 12125
    • 2b Fu X, Hossain MB, Schmitz FJ, van der Helm D. J. Org. Chem. 1997; 62: 3810
    • 2c Fu X, Ferreira ML, Schmitz FJ. J. Nat. Prod. 1999; 62: 1306
    • 2d Davis RA, Carroll AR, Quinn RJ. J. Nat. Prod. 1999; 62: 158
    • 2e Davis RA, Carroll AR, Watters D, Quinn RJ. Nat. Prod. Res., Part B 2006; 20: 1277
  • 3 Kato T, Nagae K, Hoshikawa M. Tetrahedron Lett. 1999; 40: 1941
    • 4a Layton ME, Morales CA, Shair MD. J. Am. Chem. Soc. 2002; 124: 773
    • 4b Morales CA, Layton ME, Shair MD. Proc. Natl. Acad. Sci. U.S.A. 2004; 101: 12036
  • 5 Zakarian JE, El-Azizi Y, Collins SK. Org. Lett. 2008; 10: 2927
    • 6a Fürstner A. Angew. Chem. Int. Ed. 2000; 39: 3012
    • 6b Grubbs RH. Handbook of Metathesis . Vol. 1-3. Wiley-VCH Verlag GmbH & Co. KGaA; Weinheim: 2003
    • 6c Castarlenas R, Fischmeister C, Bruneau C, Dixneuf PH. J. Mol. Catal. A: Chem. 2004; 213: 31
    • 6d Mori M. J. Mol. Catal. A: Chem. 2004; 213: 73
    • 6e Grubbs RH. Tetrahedron 2004; 60: 7117
    • 6f Nicolaou KC, Bulger PG, Sarlah D. Angew. Chem. Int. Ed. 2005; 44: 4490
    • 6g Astruc D. New J. Chem. 2005; 29: 42
    • 6h Schrock RR. Angew. Chem. Int. Ed. 2006; 45: 3748
    • 6i Chauvin Y. Angew. Chem. Int. Ed. 2006; 45: 3740
    • 6j Collins SK. J. Organomet. Chem. 2006; 691: 5122
    • 6k Grubbs RH. Angew. Chem. Int. Ed. 2006; 45: 3760
    • 6l Grubbs RH, Schrock RR, Fürstner A. Adv. Synth. Catal. . Vol. 349. Wiley-VCH Verlag GmbH & Co. KGaA; Weinheim: 2007: 1-265
    • 6m Kotha S, Lahiri K. Synlett 2007; 2767
    • 6n Hoveyda AH, Zhugralin AR. Nature 2007; 450: 243
    • 6o Clavier H, Grela K, Kirschning A, Mauduit M, Nolan SP. Angew. Chem. Int. Ed. 2007; 46: 6786
    • 6p Kotha S, Shah V, Mandal K. Adv. Synth. Catal. 2007; 349: 1159
    • 6q Kotha S, Meshram M, Tiwari A. Chem. Soc. Rev. 2009; 38: 2065
    • 6r Cossy J, Arseniyadis S, Meyer C. Metathesis in Natural Product Synthesis; Strategies, Substrates and Catalysts . Wiley-VCH Verlag GmbH & Co. KGaA; Weinheim: 2010
    • 6s Grela K. Beilstein J. Org. Chem. 2010; 6: 1089
    • 6t Kang SY, Kim JM, Lee JS, Lee J. Bioorg. Med. Chem. Lett. 2011; 21: 3759
    • 7a Fürstner A, Langemann K. Synthesis 1997; 792
    • 7b Grubbs RH, Lee CW. J. Org. Chem. 2001; 66: 7155
    • 7c Chuchuryukin AV, Dijkstra HP, Suijkerbuijk BM. J. M, Gebbink RJ. M. K, van Klink GP. M, Mills AM, Spek AL, van Koten G. Angew. Chem. Int. Ed. 2003; 42: 228
    • 7d Gradillas A, Pérez-Castells J. Angew. Chem. Int. Ed. 2006; 45: 6086
    • 7e Albrecht M, Yeni Fröhlich R. Synlett 2007; 2295
    • 7f El-Azizi Y, Zakarian JE, Bouillerand L, Schmitzer AR, Collins SK. Adv. Synth. Catal. 2008; 350: 2219
    • 7g Diederich F, Stang PJ, Tykwinski RR. Modern Supramolecular Chemistry: Strategies for Macrocycle Synthesis . Wiley-VCH Verlag GmbH & Co. KGaA; Weinheim: 2008: 29-67
    • 7h Abell AD, Alexander NA, Aitken SG, Chen H, Coxon JM, Jones MA, McNabb SB, Muscroft-Taylor A. J. Org. Chem. 2009; 74: 4354
    • 7i Muthusamy S, Azhagan D. Tetrahedron 2010; 66: 8196
    • 7j Jarikote DV, Murphy PV. Eur. J. Org. Chem. 2010; 4959
    • 7k Bolduc P, Jacques A, Collins SK. J. Am. Chem. Soc. 2010; 132: 12790
    • 8a Diederich F. Cyclophanes . Royal Society of Chemistry; Cambridge: 1991
    • 8b Vögtle F. Cyclophane Chemistry: Synthesis, Structures, and Reactions . John Wiley and Sons; Chichester: 1993
    • 8c Weber E. Cyclophanes . Vol. 172 Springer Verlag; Berlin: 1994
    • 8d Takemura H. Cyclophane Chemistry for the 21st Century . Research Signpost; Trivandrum: 2002
    • 8e Gleiter R, Hopf H. Modern Cyclophane Chemistry . Wiley-VCH Verlag GmbH & Co. KGaA; Weinheim: 2004
    • 8f Davis F, Higson S. Macrocycles: Construction, Chemistry and Nanotechnology Applications . John Wiley and Sons Ltd; Chichester: 2011
    • 9a Jimenez L, Diederich F. Tetrahedron Lett. 1989; 30: 2759
    • 9b Diederich F, Lutter HD. J. Am. Chem. Soc. 1989; 111: 8438
    • 9c Seel C, Vögtle F. Angew. Chem. Int. Ed. Engl. 1992; 31: 528
    • 9d Newman DJ, Cragg GM, Snader KM. Nat. Prod. Rep. 2000; 17: 215
    • 9e Fürstner A. Eur. J. Org. Chem. 2004; 943
    • 9f Rajakumar P, Rasheed AM. A, Rabia AI, Chamundeeswari D. Bioorg. Med. Chem. Lett. 2006; 16: 6019
    • 9g Rajakumar P, Rasheed AM. A, Balu PM, Murugesan K. Bioorg. Med. Chem. 2006; 14: 7458
    • 9h Driggers EM, Hale SP, Lee J, Terrett NK. Nat. Rev. Drug Discovery 2008; 7: 608
    • 9i Huang M, Song L, Liu B. Org. Lett. 2010; 12: 2504
    • 9j Yoshinari T, Ohmori K, Schrems MG, Pfaltz A, Suzuki K. Angew. Chem. Int. Ed. 2010; 49: 881
    • 9k Kotha S, Krishna NG, Halder S, Misra S. Org. Biomol. Chem. 2011; 9: 5597
    • 10a Bodwell GJ, Nandaluru PR. Isr. J. Chem. 2012; 52: 105
    • 10b Mohan A, Sankararaman S. Isr. J. Chem. 2012; 52: 92
    • 11a Kotha S, Halder S, Damodharan L, Pattabhi V. Bioorg. Med. Chem. Lett. 2002; 12: 1113
    • 11b Kotha S, Behera M, Kumar RV. Bioorg. Med. Chem. Lett. 2002; 12: 105
    • 11c Kotha S, Mandal K, Arora KK, Pedireddi VR. Adv. Synth. Catal. 2005; 347: 1215
    • 11d Kotha S, Behera M, Shah V. Synlett 2005; 1877
    • 11e Kotha S, Halder S. ARKIVOC 2005; (iii): 56
    • 11f Kotha S, Mandal K. Eur. J. Org. Chem. 2006; 5387
    • 11g Kotha S, Lahiri K. Eur. J. Org. Chem. 2007; 1221
    • 11h Kotha S, Mandal K. Chem. Asian J. 2009; 4: 354
    • 11i Kotha S, Chavan AS, Mobin S. J. Org. Chem. 2012; 77: 482
  • 12 Weng X, Ren L, Weng L, Huang J, Zhu S, Zhou X, Weng L. Angew. Chem. Int. Ed. 2007; 46: 8020
    • 13a Yamazaki T, Kasatkin A, Kawanaka Y, Sato F. J. Org. Chem. 1996; 61: 2266
    • 13b Salomon RG, Coughlin DJ, Ghosh S, Zagorski MG. J. Am. Chem. Soc. 1982; 104: 998
    • 13c Oppolzer W, Pitteloud R, Strauss HF. J. Am. Chem. Soc. 1982; 104: 6476
    • 13d Williams RM, Lee BH, Miller MM, Anderson OP. J. Am. Chem. Soc. 1989; 111: 1073
    • 13e Saint-Dizier AC, Kilburn JD. Tetrahedron Lett. 2002; 43: 6201
    • 14a Miyazawa N, Ogasawara K. Synlett 2002; 1065
    • 14b Grenning AJ, Tunge JA. J. Am. Chem. Soc. 2011; 133: 14785 ; and the references cited therein
  • 15 Mori K, Ohmori K, Suzuki K. Angew. Chem. Int. Ed. 2009; 48: 5638
  • 16 Fisher A, Henderson GN. Synthesis 1985; 641
  • 17 We have determined the E/Z ratio of RCM products 1619 (Figure 2), based on 1H NMR spectral data. In most of the cases, we observed E-configured compounds as the major product; this assumption was based on our earlier experience on cyclophane derivatives. See reference 11i.
  • 18 Alkene Derivatives of Malonate Ester; General Procedure: To a suspension of NaH (3 equiv) in THF was added 3 (1 equiv) dropwise at 0 °C. The reaction mixture was warmed to r.t. and stirred for 1 h. Bromide 5c (1.1 equiv) was added and the reaction mixture was stirred at r.t. for 12 h under nitrogen. At the conclusion of the reaction (TLC monitoring), the reaction mixture was quenched with H2O and extracted with diethyl ether. The organic layer was washed with brine, dried with Na2SO4, and concentrated under reduced pressure. The crude product was purified by column chromatography (silica gel; EtOAc–petroleum ether, 4%) to afford 6c (67%) as a liquid. 1H NMR (400 MHz, CDCl3): δ = 1.18–1.22 (m, 6 H), 1.35–1.40 (m, 2 H), 1.81–1.90 (m, 2 H), 2.01–2.05 (m, 2 H), 3.26 (t, J = 7.2 Hz, 1 H), 4.12 (q, J = 7.1 Hz, 4 H), 4.88–4.97 (m, 2 H), 5.66–5.70 (m, 1 H). 13C NMR (100 MHz, CDCl3): δ = 13.90, 26.38, 28.02, 33.14, 51.69, 61.05, 114.83, 137.77, 169.23. IR (neat): 2929, 2859, 1741, 1640, 1464, 1368, 1183 cm–1. HRMS (Q-Tof): m/z [M + Na] calcd for C12H20O4Na: 251.1259; found: 251.1265. Alkylation of Ethyl Acetoacetate; General Procedure: In a 100 mL round-bottomed flask equipped with a nitrogen gas inlet, ethyl acetoacetate 4 (1 equiv) was added dropwise at r.t. to K2CO3 (4 equiv) in acetonitrile and the mixture was stirred for 1 h. Bromide 5c (1.1 equiv) was added and the reaction mixture was stirred at r.t. for 12 h under a nitrogen atmosphere. At the conclusion of the reaction (TLC monitoring), the crude mixture was filtered through a Celite pad and extracted with diethyl ether. The organic layer was washed with brine and dried with Na2SO4 and concentrated under reduced pressure. The crude product was purified by column chromatography (silica gel; EtOAc–petroleum ether, 4%) to afford alkylated ethyl acetoacetate derivative 8c (68%) as a liquid. 1H NMR (400 MHz, CDCl3): δ = 1.28 (t, J = 7.2 Hz, 3 H), 1.32–1.44 (m, 2 H), 1.80–1.92 (m, 2 H), 2.00–2.10 (m, 2 H), 2.22 (s, 3 H), 3.41 (t, J = 7.4 Hz, 1 H), 4.19 (q, J = 7.2 Hz, 2 H), 4.94–5.04 (m, 2 H), 5.72–5.82 (m, 1 H). 13C NMR (100 MHz, CDCl3): δ = 14.16, 26.64, 27.62, 28.82, 33.41, 59.77, 61.37, 115.13, 137.96, 169.88, 203.24. IR (neat): 2991, 2934, 1742, 1716, 1641, 1448, 1360, 1216 cm–1. HRMS (Q-Tof): m/z [M + H] calcd for C11H19O3: 199.1334; found: 199.1334. General Procedure for 10c: To a suspension of NaH (3 equiv) in THF was added alkylated malonate ester 6c (1 equiv) dropwise at 0 °C. The reaction mixture was warmed to r.t. and stirred for 1 h. Dibromide 1 (0.5 equiv) was added and the reaction mixture was stirred at r.t. for 12 h under nitrogen. The organic layer was washed with brine, dried with Na2SO4, and concentrated under reduced pressure. The crude product was purified by column chromatography (silica gel; EtOAc–petroleum ether, 8%) to afford bis-alkene malonate derivative 10c (65%) as a white solid material. Mp 60–65 °C. 1H NMR (400 MHz, CDCl3): δ = 1.22 (t, J = 7.1 Hz, 12 H), 1.34–1.41 (m, 4 H), 1.70–1.74 (m, 4 H), 1.99 (q, J = 7.1 Hz, 4 H), 3.24 (s, 4 H), 3.64 (s, 6 H), 4.08–4.23 (m, 8 H), 4.89–5.00 (m, 4 H), 5.70–5.81 (m, 2 H), 6.52 (s, 2 H). 13C NMR (100 MHz, CDCl3): δ = 14.21, 23.87, 31.73, 31.97, 34.18, 55.68, 58.72, 61.13, 114.04, 114.76, 124.20, 138.52, 151.87, 171.76. IR (neat): 3054, 2989, 1729, 1641, 1422, 1266 cm–1. HRMS (Q-Tof): m/z [M + H] calcd for C34H51O10: 619.3482; found: 619.3499. General Procedure for 11c: To a suspension of NaH (3 equiv) in THF was added alkylated malonate ester 6c (1 equiv) dropwise at 0 °C. The reaction mixture was warmed to r.t. and stirred for 1 h. p-Xylylene dibromide 2 (0.5 equiv) was added and the reaction mixture was stirred at r.t. for 12 h under nitrogen. At the conclusion of the reaction (TLC monitoring), the reaction was quenched with H2O and extracted with diethyl ether. The organic layer was washed with brine, dried with Na2SO4, and concentrated under reduced pressure. The crude product was purified by column chromatography (silica gel; EtOAc–petroleum ether, 8%) to afford bis-alkene malonate ester derivative 11c (62%) as a white solid material. Mp 60–65 °C. 1H NMR (400 MHz, CDCl3): δ = 1.23 (t, J = 7.2 Hz, 12 H), 1.34–1.40 (m, 4 H), 1.73–1.77 (m, 4 H), 2.04 (q, J = 7.2 Hz, 4 H), 3.19 (s, 4 H), 4.10–4.22 (m, 8 H), 4.97–5.03 (m, 4 H), 5.78–5.80 (m, 2 H), 6.95 (s, 4 H). 13C NMR (100 MHz, CDCl3): δ = 14.22, 23.72, 31.54, 33.90, 37.87, 58.90, 61.33, 115.16, 129.92, 134.97, 138.21, 171.45. IR (neat): 3054, 2989, 1729, 1641, 1422, 1266 cm–1. HRMS (Q-Tof): m/z [M + H] calcd for C32H47O8: 559.3271; found: 559.3286. General Procedure for 12c: In a 100 mL round-bottomed flask equipped with a nitrogen gas inlet, K2CO3 (4 equiv) in acetonitrile was added to alkylated ethyl acetoacetate 8c (1 equiv) dropwise at r.t. and stirred for 1 h. Dibromo compound 1 (0.5 equiv) was added and the reaction mixture was stirred at r.t. for 12 h under nitrogen. At the conclusion of the reaction (TLC monitoring), the crude mixture was filtered through a Celite pad and extracted with diethyl ether. The organic layer was washed with brine, dried with Na2SO4, and concentrated under reduced pressure. The crude product was purified by column chromatography (silica gel; EtOAc–petroleum ether, 6%) to afford the alkylated ethyl acetoacetate derivative 12c (72%) as a solid. Mp 60–65 °C. 1H NMR (400 MHz, CDCl3): δ = 1.23–1.25 (m, 6 H), 1.29–1.37 (m, 4 H), 1.64–1.76 (m, 4 H), 2.03 (q, J = 7.0 Hz, 4 H), 2.11 (s, 6 H), 3.06–3.31 (m, 4 H), 3.62 (s, 6 H), 4.09–4.26 (m, 4 H), 4.91–5.01 (m, 4 H), 5.69–5.80 (m, 2 H), 6.50 (s, 2 H). 13C NMR (100 MHz, CDCl3): δ = 14.20, 23.76, 27.15, 31.30, 31.66, 34.22, 55.53, 61.32, 64.32, 114.29, 115.05, 124.30, 138.28, 151.66, 172.61, 205.10. IR (neat): 2979, 2911, 1739, 1717, 1531, 1212 cm–1. HRMS (Q-Tof): m/z [M + Na] calcd for C32H46O8Na: 581.3090; found: 581.3105. General procedure for 13c: To a suspension of NaH (3 equiv) in THF was added alkylated ethyl acetoacetate 8c (1 equiv) dropwise at 0 °C. The reaction mixture was warmed to r.t. and stirred for 1 h. Dibromide 1 (0.5equiv) was added to the reaction mixture, which was stirred at r.t. for 12 h under nitrogen. At the conclusion of the reaction (TLC monitoring), the reaction was quenched with H2O and extracted with diethyl ether. The organic layer was washed with brine, dried with Na2SO4, and concentrated under reduced pressure. The crude product was purified by column chromatography (silica gel; EtOAc–petroleum ether, 10%) to afford bis-alkylated derivative 13c (66%) as a white solid. Mp 60–65 °C. 1H NMR (400 MHz, CDCl3): δ = 1.12–1.15 (m, 6 H), 1.33–1.45 (m, 4 H), 1.45–1.54 (m, 2 H), 1.59–1.70 (m, 2 H), 2.00–2.07 (m, 4 H), 2.65–2.75 (m, 2 H), 2.75–2.85 (m, 4 H), 3.74 (s, 6 H), 4.00–4.08 (m, 4 H), 4.90–5.00 (m, 4 H), 5.71–5.82 (m, 2 H), 6.59 (s, 2 H). 13C NMR (100 MHz, CDCl3): δ = 14.43, 26.71, 32.01, 33.48, 33.75, 45.83, 56.11, 60.15, 113.64, 114.74, 126.60, 138.70, 151.36, 176.23. IR (neat): 2931, 2860, 1726, 1506, 1211 cm–1. HRMS (Q-Tof): m/z calcd: for C28H43O6 [M + H]: 475.3060; found 475.3060. General Procedure for 14c and 15c: To a degassed solution of bis-alkylated derivative 10c or 11c in anhydrous toluene (5 mL) was added Grubbs 2nd generation catalyst (5 mol%) at r.t., and reaction mixture was heated at reflux overnight. At the conclusion of the reaction (TLC monitoring), the crude reaction mixture was filtered through a Celite pad (washed with CH2Cl2) and concentrated under reduced pressure. The crude product was purified by column chromatography (silica gel; EtOAc–petroleum ether, 5%) to afford cyclophane derivatives 14c and 15c. Compound 14c: Yield: 78%. 1H NMR (400 MHz, CDCl3): δ = 1.01–1.14 (m, 4 H), 1.23–1.30 (m, 12 H), 1.44 (td, J = 13.4, 4.4 Hz, 2 H), 1.59 (td, J = 13.4, 4.4 Hz, 2 H), 1.76–1.77 (m, 2 H), 1.92–1.95 (m, 2 H), 3.13 (s, 1 H), 3.17 (s, 1 H), 3.62 (s, 1 H), 3.66 (s, 1 H), 3.67 (s, 6 H), 4.14–4.30 (m, 8 H), 5.06 (t, J = 3.9 Hz, 2 H), 6.63 (s, 2 H). 13C NMR (100 MHz, CDCl3): δ = 14.26, 23.50, 31.27, 32.43, 33.27, 55.78, 57.63, 61.13, 114.36, 124.43, 130.34, 151.71, 172.40. IR (neat): 2931, 2860, 1730, 1510, 1212 cm–1. HRMS (Q-Tof): m/z [M + H] calcd for C32H47O10: 591.3169; found: 591.3160. Compound 15c: Yield: 80%. 1H NMR (400 MHz, CDCl3): δ = 1.10 (m, 4 H), 1.28 (m, 12 H), 1.46–1.48 (m, 4 H), 1.83–1.88 (m, 4 H), 3.30 (s, 4 H), 4.25 (m, 8 H), 5.07–5.09 (m, 2 H), 7.02 (s, 4 H). 13C NMR (100 MHz, CDCl3): δ = 14.27, 23.49, 31.53, 32.49, 39.06, 58.15, 61.50, 129.75, 130.53, 135.36, 172.06. IR (neat): 2982, 2940, 1732, 1446, 1266 cm–1. HRMS (Q-Tof): m/z [M + H] calcd for C30H43O8: 531.2958; found: 531.2957. General Procedure for 18: In a 100 mL round-bottomed flask was charged flash chromatographic-grade silica gel (6 g). A solution of CAN (5 mol%) in water (2.5 mL) was added dropwise until a free-flowing yellow solid was obtained. CH2Cl2 (25 mL) was added and the bis-alkylated derivative 13c dissolved in CH2Cl2 (2 mL) was added dropwise. At the conclusion of the reaction (TLC monitoring), the crude mixture was filtered through a Celite pad (washed with CH2Cl2) and the filtrate was concentrated under reduced pressure. The crude product was purified by column chromatography (silica gel; EtOAc–petroleum ether, 5%) to afford bis-alkylated quinone derivative 18 (67%) as a liquid. 1H NMR (400 MHz, CDCl3): δ = 1.19–1.22 (m, 6 H), 1.37–1.45 (m, 4 H), 1.49–1.56 (m, 2 H), 1.63–1.70 (m, 2 H), 2.06 (q, J = 7.0 Hz, 4 H), 2.59–2.65 (m, 6 H), 4.07–4.12 (m, 4 H), 4.94–5.02 (m, 4 H), 5.71–5.81 (m, 2 H), 6.54 (s, 2 H). 13C NMR (100 MHz, CDCl3): δ = 14.42, 26.40, 31.75, 32.22, 33.52, 44.24, 60.67, 115.10, 133.89, 138.24, 146.68, 174.78, 187.40. IR (neat): 2931, 2858, 1728, 1464, 1266 cm–1. HRMS (Q-Tof): m/z [M + H] calcd for C26H37O6: 445.2590; found: 445.2601.