1
Introduction
Since its emergence more than 15 years ago, homogeneous gold catalysis has developed
into a very active area of research.[1] The straightforward access to various gold complexes, their ease of use and general
high stability, allied to the variety of selective and unusual transformations they
can allow, have enabled homogenous gold catalysis to become a synthetic tool of choice
for the generation of molecular diversity and structural complexity. Since gold catalysts
are electrophilic in nature and particularly prone to activate carbon–carbon systems,
a large number of the synthetic transformations reported to date involve cationic
intermediates, whose reactivity can be modulated, to some extent, by the presence
of the gold moiety. Gold carbenes of type 1, for instance, have been intensively studied (Scheme [1]).[1]
[2] They can be accessed from a variety of substrates, under different reaction conditions
and following a range of mechanistic pathways. In sharp contrast, and while their
first appearance in the literature as potential intermediates in a synthetic transformation
dated from 2004, gold vinylidenes species 2 have comparatively attracted less attention.[3] Such a situation can probably be imputed to a longstanding lack of synthetic processes
to access them in an easy and selective manner.
Scheme 1 Gold carbene and gold vinylidene species
The context changed in 2012 when the groups of Hashmi and Zhang discovered that arenediyne
substrates could be used for the generation of gold vinylidenes, and that these species
demonstrated interesting reactivities. Since then, more attention has been focused
onto the field and a variety of synthetic transformations based on their involvement
as key reactive species have been reported.
The aim of this short review is to give the reader an overview of the synthetic approaches
developed so far to access gold vinylidenes and the various reactivities these species
can exhibit. It is organized by means of gold vinylidene generation: 1) 1,2-migration
processes, 2) dual gold catalysis, and 3) other unrelated processes. The reactivities
of gold vinylidenes are illustrated for each transformation by a short selection of
representative examples.
2
1,2-Migration Processes
The treatment of an alkyne substrate 3 bearing either a halogen atom (Br, I) or a trialkylsilyl (SiR3) substituent with an electrophilic gold species is probably the most straightforward
manner to generate vinylidene gold species (Scheme [2]). Indeed, upon activation of the C≡C bond by gold, the X group can perform a 1,2-migration
to deliver a vinylidene gold intermediate 4 that can then react via nucleophilic trapping or C–H bond insertion.
Scheme 2 Generation of gold vinylidene species from alkynes by 1,2-migratory process
The very first example of such a reactivity (and involvement of a vinylidene gold
species in a synthetic process) was reported by Fürstner and co-workers in 2004.[4] While working on the synthesis of substituted phenanthrene by cycloisomerization
of o-alkynylbiaryl derivatives, they observed that bromo- and iodoalkynes 5Br
and 5I
were rearranged selectively into phenanthrene 6Br
and 6I
in the presence of AuCl (Scheme [3]). This reactivity was attributed to the involvement of a vinylidene gold species 7 that cyclizes onto the pendant aryl motif. DFT studies performed by Soriano and Marco-Contelles
brought support to the proposed mechanism.[5] Interestingly, the use of InCl3 as the catalyst led to a divergent reactivity with the selective formation of the
regioisomeric 10-halophenanthrenes 8.
Scheme 3 Synthesis of halophenanthrenes from haloalkynes
The same concept of 1,2-halogen migration was exploited by the group of González for
the formation of dehydroiodoquinolines from iodopropargyl amide derivatives 9 (Scheme [4]).[6] The authors found that the selectivity was dependent on the nature of the gold(I)
complex employed. The use of [(IPr)Au]NTf2 (13) as the catalyst favored the iodine migration product 11, while a phosphite-based gold complex 14 led majorly to the product of direct cyclization 12. This divergence in selectivity was explained by considering the difference of electrophilicity
between the two catalysts and the ability of NHC-based gold complexes to more favorably
stabilize the vinylidene gold intermediate 10.[7] The reaction was shown to be particularly selective in the case of substrates possessing
electron-withdrawing aryl substituents, as the competitive direct cyclization was
slowed down in such cases. The same authors also reported that the 1,2-iodine migration
process could also be employed for the selective synthesis of 3-iodo-2H-chromenes (Scheme [4]).[8]
Scheme 4 Synthesis of 3-iododehydroquinolines and -2H-chromenes
More recently, González and co-workers demonstrated that aryliodoalkynes 15 could also be employed as substrates for the synthesis of functionalized indenes
17.[9] In this case, the intermediate gold iodovinylidene species 16 cyclizes following a concerted C–H bond insertion at the benzylic position of the
substrate (Scheme [5]). This procedure represents a particularly efficient entry to iodoindenes.
Scheme 5 Synthesis of 2-iodoindenes via gold iodovinylidene intermediates
The group of Hashmi also proposed the involvement of similar gold iodovinylidene intermediates
in a synthesis of 1,3-diodonaphthalenes 20 from 1,2-bis(iodoethyl)arenes 18 (Scheme [6]).[10] In this transformation, the electrophilic species 19 was proposed to cyclize onto the pendant iodoalkyne thus inducing the nucleophilic
addition of benzene. This process could also be applied to enediyne or bromoalkyne
derivatives.
Scheme 6 Synthesis of 1,3-diiodonaphthalenes
Besides halogen atoms, it was also reported that silyl groups could undergo 1,2-migration
upon activation of a silylalkyne with an electrophilic gold species. However, examples
of such a reactivity remain rare. Seregin and Gevorgyan reported in 2006 that 2-propargylpyridine
21 could be rearranged into indolizine 23 when treated with AuBr3 in toluene at 50 °C (Scheme [7]).[11] This process was shown to be applicable to a series of other heterocyclic motifs.
A mechanism involving the nucleophilic addition of the pyridine nitrogen atom onto
an intermediate gold vinylidene 22 was initially proposed to explain the formation of 23. DFT calculations conducted later on by Li and Gevorgyan led to question the likelihood
of such a mechanism while not ruling it out, though.[12]
Scheme 7 Postulated gold-mediated 1,2-silyl migration in the formation of fused pyrrole-containing
heterocycles
A more recent and unambiguous example of 1,2-silyl group migration was reported by
the group of Barriault.[13] During their studies on the total syntheses of biologically active polyprenylated
polycyclic acylphloroglucinols,[14] the authors isolated an intriguing organogold complex 25 that was produced when ynone 24 was reacted with a catalytic amount of [(JohnPhos)Au(NCMe)]SbF6 (Scheme [8]). Intrigued by the structure of 25 and the relative position of the TBS group/the gold residue, the authors made a series
of experiments which showed that: a) the process could be applied to other trialkylsilyl
groups and b) alkenyl gold species of type 28 could be generated and isolated in the presence of various gold complexes. To explain
this reactivity, a mechanism involving a gold vinylidene species 27, intermediately produced by 1,2-migration of the silyl group on the gold-activated
C≡C, was proposed. Interestingly, the use of di- and triphenylsilyl groups prevents
the migration thus leading to the formation of the regioisomeric organogold complex.
The authors also demonstrated that 28 could be efficiently demetalated in the presence of electrophilic species thus allowing
the formation of further functionalized compound 29.
Scheme 8 Isolation of organogold complexes through 1,2-silyl group migration
While gold vinylidene species can be conveniently accessed by 1,2-migration from iodo-
or silylalkynes, and subsequently involved in synthetically useful transformations,
examples of such a reactivity remain rare in the literature. The migration process
generally competes with the direct nucleophilic functionalization or with the dehalogenation/desilylation
of the gold-activated alkyne.
3
Dual Gold Catalysis
A major breakthrough in the field of gold vinylidene chemistry was made when the group
of Hashmi found in 2012[15] that these reactive species could be conveniently generated by an intramolecular
reaction between a nucleophilic goldacetylide 30 and a gold-activated alkyne 31 (Scheme [9]). This important discovery paved the way to the development of a variety of dual
gold-catalyzed processes[16] which are based on the key generation of intermediate gold vinylidene species 32 from diyne substrates. These reactions are detailed in the following paragraphs.
Scheme 9 Generation of gold vinylidene species from diyne by dual gold catalysis
The story started when Hashmi and co-workers studied the reaction of arenediyne 33 in the presence of the [(IPr)Au]NTf2 complex 13 in benzene (Scheme [10]). When 33 was treated with 15 mol% of 13 at 20 °C, benzene adduct 34 was produced almost as a single product. It was proposed that 34 was formed by an initial diyne cyclization followed by the trapping of the resulting
naphthyl cation by a molecule of solvent.[10]
[17] Surprisingly, when the reaction was conducted at reflux, another unexpected benzene
adduct 35 was competitively formed. The authors discovered that the selectivity could even
be completely shifted towards the formation of 35 in the presence of a basic additive (Et3N). After an extensive and careful study of the influence of reaction conditions (nature
of catalyst and loading, additive, temperature), as well as D-labeling experiments,
the group of Hashmi proposed that the unexpected adduct 35 could be produced by an unusual mechanism involving the formation of an intermediate
gold vinylidene species (Scheme [10]).[18]
Scheme 10 Initial discovery by Hashmi and co-workers: gold vinylidene as an intermediate in
the hydroarylating-aromatization of arenediynes
The transformation would be initiated by the formation of goldacetylide 37 from 36, a process that would be favored in the presence of Et3N as an additive. A dual activation via 38 would then induce the formation of key gold vinylidene intermediate 39, which would subsequently evolve into the gem-diaurated species 40 by a sequence of hydrogen transfer and ring expansion. The catalytic cycle would
be closed by a catalyst transfer from 40 to 36 that would liberate the reaction product 41 and regenerate the di-gold complex 38. It is worth noting that 40 could be isolated and was found to be catalytically active in the process.
By capitalizing on this result, and on the basis of their mechanistic investigations,
the Hashmi group subsequently reported that dibenzopentalenes 43 could be synthesized by reacting diyne derivatives 42 in the presence of complex 13 (Scheme [11]).[19] In this transformation, the intermediate gold vinylidene 45, generated by dual gold catalysis, is trapped in an intermolecular manner by the
pendant aryl group. Interestingly, no compounds derived from an intermolecular reaction
of 45 with benzene (used as the solvent) was observed. The involvement of 45 in the process and the overall mechanistic proposal were supported by a series of
computational studies.[20] Of special interest is the catalyst transfer event, which was found to proceed between
the gem-diaurated species 46 and 42 in a 3-step sequence comprising an initial AuL+ transfer, followed by a proton transfer and a second AuL+ transfer.[20b]
Scheme 11 Synthesis of dibenzopentalenes by dual gold catalysis
Since the gold activation of the diyne is a required step prior to the formation of
the gold vinylidene species (‘initiation’ step), Hashmi and co-workers designed a
new class of σ,π-acetylide digold complexes 47 derived from propyne, which could act as traceless dual-activation catalysts (TDACs)
(Scheme [12]).[21] These complexes were shown particularly active in a series of transformations as
exemplified by the conversion of 48 into dibenzopentalene 49 (see additional examples in the following paragraphs).
Scheme 12 σ,π-Acetylide digold complexes as traceless dual-activation catalysts
The replacement of the aryl moiety at the alkyne terminus of the substrate by a substituted
allyl or benzyl group allowed an easy access to fluorenes 51 and benzofluorenes 52 (Scheme [13]).[22] The reaction should proceed in a similar manner with the initial generation of gold
vinylidene 50, which would then suffer a nucleophilic attack of the allyl or benzyl moiety to ultimately
deliver cyclized aromatic products. The nature of the final product depends on the
substitution pattern at the allyl/benzylic position of the substrate since an additional
aromatization step can take place when this position is not fully substituted.
Scheme 13 Synthesis of fluorene derivatives by dual gold catalysis
Besides undergoing nucleophilic trapping with carbon π systems, gold vinylidenes generated
by dual gold catalysis can also be involved in C–H insertion processes. This reactivity
was first demonstrated independently by the groups of Zhang and Hashmi in 2012 (Scheme
[14]).[23]
[24] Zhang and co-workers employed a combination of [(BrettPhos)Au]NTf2 as the catalyst and a pyridine oxide as a basic additive to convert arene diynes
53 into benzofulvene 57. While the reaction can be performed without this basic additive, its presence was
shown to positively affect both the rate and the efficiency of the transformation.
Hashmi and co-workers employed the catalytic system that was shown to be active in
their previously reported synthesis of dibenzopentalenes.[19] DFT calculations as well as D-labelling experiments support a mechanism in which
a dual gold-catalyzed process allows the formation of an intermediate gold vinylidene
species 55 that subsequently undergo a C–H insertion. The nature of the C–H bond activation
process was studied by Hashmi, Knizia, and Klein.[25] The group of Hashmi was also able to isolate and characterize a gem-diaurated species 56 that might participate in the catalytic cycle by transferring the Au moieties to
the diyne substrate 53. The transformation proved to be applicable to a large variety of substrates allowing
C–H insertion not only in primary or secondary C–H bonds but also in O–H and N–H bonds.
Scheme 14 Synthesis of benzofulvene derivatives by dual gold catalysis
The same C–H bond activation process could be applied to the cycloisomerization of
iodoalkyne derivatives 58 (Scheme [15]).[26] In this case, iodobenzofulvenes 59 were selectively obtained as the result of an iodine atom transfer from the substrate
58 to the gem-diaurated species 60. As described above, this transfer might proceed in 3 steps: AuL+ transfer from 60 to 58, followed by the iodine atom transfer, and a subsequent second AuL+ transfer. This transformation, which was shown to be relatively efficient, allows
for further functionalization of the fulvene core by transition-metal-catalyzed cross-coupling
reactions.
Scheme 15 Synthesis of iodobenzofulvene by iodine atom transfer
With the very same substrate 33 that led to the initial discovery of gold vinylidene generation by dual gold catalysis
(see Scheme [10]), Hashmi and co-workers demonstrated that intermolecular reactions of gold vinylidene
61 with alkanes or alkenes was also accessible (Scheme [16]).[27] Reactions of 61 with cycloalkanes (employed as the solvent) led to the isolation of substituted naphthalenes
62 in moderate yields. The mechanism for this transformation was not detailed. The reaction
was more efficient when the trapping of 61 was performed in the presence of linear or cyclic alkenes. In this case, fused cyclobutene
derivatives 64, derived from the gold-catalyzed rearrangement of the intermediate alkylidenecyclopropane
63 could be isolated.
Scheme 16 Intermolecular C–H activation and cyclopropanation with gold vinylidene species
Interestingly, while aryldiynes of type 65 were shown to undergo a dual gold-catalyzed 5-endo-dig cyclization leading to the formation of gold vinylidene species 66, it was demonstrated by the Zhang group that the cyclization event could alternatively
proceed following a 6-endo-dig mode when the aryl group tethering the two alkyne moieties was replaced by an alkene
67 (Scheme [17]).[28] This shift in cyclization mode lead to the formation of intermediate ortho-aurophenyl cations 68, which can also be regarded as carbenes 69. These species were shown to react via C–H activation or with nucleophilic patterns
to produce a variety of aromatic compounds. The same observation was made by the group
of Hashmi with 2,3-dialkynylthiophene derivatives 70 (Scheme [17]).[29] Interestingly, the regioisomeric 3,4 dialkynylthiophenes 71 react similarly to aryldiynes 65 following 5-endo-dig cyclization process leading to gold vinylidene intermediates.[30] Computational studies by Hashmi and co-workers showed that this divergence in selective
arises from electronic and not steric effect.
Scheme 17 5-endo-dig versus 6-endo-dig cyclization pathways in dual gold catalysis of 1,5-diynes
However, the presence of an unsaturated C=C motif between the two alkyne units is
not a structural requirement to enable the dual gold-catalyzed generation and selective
reaction of gold vinylidenes. The group of Van der Eycken has reported for instance
that diynamides 72, which can be obtained in a straightforward manner by an Ugi reaction, could be cyclized
into cyclopentapyridone derivatives 74 in the presence of a catalytic amount of [(IPr)Au]OTf in 1,2-dichloroethane at 120 °C
(Scheme [18]).[31] In this transformation, the gold vinylidene species 73, produced intermediately by a dual gold-catalyzed cyclization of diyne 72, inserts into a primary or tertiary inactivated C–H bond to generate a new five-membered
fused cycle.
Scheme 18 C–H activation with gold vinylidenes using diyne substrates produced by an Ugi reaction
In the same vein, Hashmi, Fuji, and Ohno demonstrated that dual gold catalysis could
also be applied to the cycloisomerization of substrates 75 possessing a simple two carbon alkyl moiety tethering the two alkyne units (Scheme
[19]).[32] Depending on the substitution pattern of the substrate linker, the intermediate
gold vinylidene species 76 could evolve either via C–H activation or nucleophilic trapping. As for the reactivity
trend, competition experiments showed that 1) the C–H activation pathway was more
favorable than the nucleophilic trapping by an aromatic ring and 2) nucleophilic trapping
by aromatics led preferentially to the formation of a new 6-membered (as compared
to a 5-membered one). In a recent article, the group of Hashmi reported another example
of selective nucleophilic trapping using polyarylated 1,5-hexadiyne substrates.[33] Selected examples of such transformations are given in Scheme [19].
Scheme 19 Selective reactivity of gold vinylidene species generated from variously functionalized
1,5-hexadiyne substrates
Gold vinylidene generated by dual gold catalysis also proved to be useful species
for the synthesis of various nitrogen containing heterocyclic motifs. For example,
and by analogy with the work performed with aryldiyne substrates, the group of Hashmi
developed a procedure for the synthesis of polyclic fused pyridines 80 from pyridinium substrates 77 (Scheme [20]).[34] Initial tests showed that the cycloisomerization could not be directly performed
from the ‘free’ pyridines, presumably due to their capacity to strongly bind to gold
catalysts. It is also interesting to note that while simple methylpyridium salts exhibit
a low to moderate reactivity, the benzyl ones 77 bearing either a PF6
– or NTf2
– counteranion, could be readily and efficiently converted into 79 by treatment with [(IPr)Au]NTf2 at 55 °C in dichloromethane. The transformation, which involves the C–H insertion
of gold vinylidene 78 as the key step, could be employed for the synthesis of a variety of polycyclic pyridinium
79. These salts could be subsequently hydrogenated and debenzylated to liberate the
corresponding free pyridines 80. This protocol appears to be particularly useful as it allows a rapid access to structural
motifs, which are found in molecules described to possess insecticidal or antimicrobial
properties.
Scheme 20 Access to polycyclic pyridinium salts and pyridines by dual gold catalysis
Scheme 21 Synthesis of pyrrole derivatives by C–H activation or nucleophilic trapping of gold
vinylidene species
Several synthetic procedures have also been reported using ynamide derivatives as
substrates for the synthesis of heterocyclic structures. Ohno, Hashmi, and Fuji have
demonstrated that N-propargyl ynamide of type 81 could be converted in moderate to goods yield into 3,4-disubstituted polyclic pyrroles
83 and 84 (Scheme [21]).[35] The introduction of a nitrogen atom in the diyne tether does not affect the reactivity
previously observed for substrates possessing an all-carbon linker. The intermediate
gold vinylidene 82 was found capable of performing either C–H activation or nucleophilic trapping to
produce pyrrole derivative 83 or 84, respectively. The C–H activation turned out to be generally more efficient than
the arylation process. It is worth noting that the cyclization leading to 82 proceeds by umpolung via the addition of the nucleophilic goldacetylide to the carbon
of the ynamide.
Recently, our group reported that structurally similar ynamide substrates 85 possessing a longer linker between the two alkyne units could similarly react to
produce a variety of N-containing aromatic heterocycles 88 (Scheme [22]).[36] The use of [(RuPhos)Au]NTf2 in refluxing chloroform was found to be a set of optimal catalytic conditions to
perform the transformation. The use of a pyridine additive was observed to increase
the reaction rates and in some cases to significantly improve the yields. In contrast
to the previously reported dual gold-catalyzed reactions that proceed by 5-endo-dig cyclization, the given transformation singularly involves either a 5-, 6-, or 7-exo-dig cyclization. This process allows for the generation of a key gold vinylidene intermediate
86, which subsequently reacts in an intramolecular manner with a nucleophilic alkenyl
or aryl moiety to produce a new substituted phenyl or naphthyl motif. Overall, this
transformation can be regarded as an intramolecular gold-catalyzed formal dehydro-Diels–Alder
reaction between an enyne and an alkyne. We also performed a series of D-labeling
experiments and kinetic studies that support the involvement of a dual gold catalysis
mechanism with species 86 and 87. The very same type of transformation was reported very recently by the group of
Zi using [(IPr)Au]NTf2 in combination with DIPEA.[37]
Scheme 22 Involvement of gold vinylidene species in formal dehydro-Diels–Alder reactions of
ynamide derivatives
In a very recent article, Hyland and Pyne described an unusual cycloisomerization
of an enediyne motif 89 that produces isoindolinones 94 (Scheme [23]).[38] The singularity of this process lies in the fact that the dual catalyzed cyclization
event involves the initial addition of a nucleophilic goldacetylide on the alkene
moiety of the gold-activated enyne (see 90 → 91). The resulting gold vinylidene species 91 subsequently cyclizes onto the allenylgold moiety to deliver a new gold carbene intermediate
92. The rearrangement of 92 into a six-membered cycle 93 followed by aromatization of the system finally produce 94. This mechanism was supported by a combination of D-labeling experiments and DFT
calculations. An alternative direct pathway leading to 93 from 91 was also suggested. This transformation was found to perform best with the oxo [(Ph3PAu)3O]BF4 gold complex in toluene at reflux to deliver a variety of isoindolinones 94 in high yields. Interestingly, the propiolamide substrates 89 could be easily obtained from the corresponding protected amino aldehydes 95 with high enantiopurity, and the gold-catalyzed transformation was found to retain
this level of purity.
Scheme 23 Gold vinylidenes as intermediates in the synthesis of isoindolinones by dual gold
catalysis
Besides performing C–H activation or undergoing nucleophilic trapping with C-nucleophiles,
gold vinylidene species have also been demonstrated to react with oxygen-based nucleophiles.
As reported by the group of Hashmi,[39] a gold vinylidene 97 intermediately generated by dual gold catalysis from an aryldiyne substrate 96 can, for instance, react with water (Scheme [24]). This nucleophilic trapping generates an aurated enol 98 which then tautomerizes to the gold acyl species 99. A subsequent CO extrusion produces the alkylgold 100, which ultimately yield the indane product 101 either by protodemetalation or by catalyst transfer with substrate 96. The CO loss was confirmed by GC/MS spectrometry measurements using either 18O-labeled water or a substrate 13C-labeled at the alkyne carbon being removed by CO extrusion. Since the trapping of
the vinylidene intermediate with water proceeds in an intermolecular fashion, a specific
design of the substrate is required to prevent (or limit) any competitive intramolecular
C–H activation or nucleophilic trapping. The reaction was shown to be the most efficient
when it was performed with the [(IPr)Au]NTf2 as the catalyst in THF at room temperature with only 5 equivalents of water. The
efficiency was, however, shown to be strongly dependent on the substrate substitution
pattern.
Scheme 24 Reaction of gold vinylidene species with water
Intramolecular transfers of alkoxy groups to gold vinylidene species is also feasible
as reported by the Zhang group.[40] When aryl diynes 102 possessing a methoxy group at the propargylic position were reacted with a catalytic
amount of [(IPr)Au]NTf2 in a t-BuOH/DCE mixture at 70 °C, various polyclic fused cylopentenones 106 could be obtained (Scheme [25]). To explain their formation, the authors proposed that a transfer of the methoxy
group from the allylic position to the gold vinylidene moiety could proceed in the
intermediately formed species 103. A subsequent isomerization of the resulting carbocation 104 would allow a Nazarov-type cyclization that would ultimately lead to the formation
of 106 after hydrolysis of cyclopentadiene 105.
Scheme 25 Intramolecular migration of a methoxy group onto a gold vinylidene
The same group later reported that gold vinylidene 108 derived from aryldiyne 107, could also react with 3,5-dichloropyridine oxide to generate in situ a diaurated
ketene 109 (Scheme [26]).[41] This species could subsequently suffer an intra- or intermolecular nucleophilic
attack of an alcohol or even water to produce indene derivatives 111 bearing either a lactone, an ester, or a carboxylic acid functional group. The key
oxidation step of 108 into 109 with the pyridine oxide was supported by DFT calculations, as well as the involvement
of the gem-digold species 110. This three-component reaction, which can be regarded as an oxidative cyclization
of a diyne, was shown to be efficient and applicable to a large variety of substrates.
Scheme 26 Oxidation of gold vinylidene species to ketene and their intra-or intermolecular
trapping
As seen from the different examples of reactions compiled in this section, dual gold
catalysis represents a particularly efficient means of generating gold vinylidene
species from diyne substrates. Depending on the nature of the linker between the two
alkyne units and the substitution pattern of the substrate, these reactive electrophilic
intermediates can undergo C–H insertion at a non-activated position or react with
carbon and oxygen nucleophiles to produce a variety of polycyclic (aromatic) compounds.
4
Other Processes
Besides 1,2-migration of iodine or silyl groups from the terminal position of a gold-activated
alkyne or dual gold catalysis of diynes, a few other processes have been reported
for the generation and use of gold vinylidene intermediates. These alternative methods
are described in the following paragraphs.
The group of Zhang has reported in 2016 that TMS-protected ynones 112 could be converted into 2-bromocyclopentenones 116 by treatment of 112 with a catalytic amount of (IPr)AuCl and AgSbF6 in the presence of N-bromoacetamide (NBA) as the brominating agent (Scheme [27]).[42] This transformation was shown to be high yielding, compatible with various commonly
used functional groups and, regio- and stereoselective. While the mechanism has not
been completely elucidated, the authors have proposed on the basis of experimental
studies that the reaction proceeds via the intermediate formation of a bromovinylidene
species 115. The latter can then undergo a C–H insertion at a non-activated position of a pendant
alkyl group. As for the generation of 115, it was suggested that under the reaction conditions, the silylalkyne first converts
into the goldacetylide 113. Upon activation of the C=O bond in 113 by an acidic species (Ag+/TMS+), a gold allenylidene species 114
[43] would form and subsequently react with NBA to produce 115. The corresponding bromoalkyne was demonstrated not to be an intermediate in this
transformation, thus ruling out the possibility of a 1,2-migration process (see Section
2). The nature of the C–H insertion step was computationally studied by Hashmi, Knizia,
and Klein.[25]
Scheme 27 Generation of gold vinylidenes from goldacetylides under acidic conditions
Hashmi and co-workers also demonstrated that goldacetylides 118, generated in situ by reaction between a terminal alkyne 117 and the gold pre-catalyst 119, could perform a nucleophilic attack at a position bearing an aryl sulfonate leaving
group, thus allowing the formation of a gold vinylidene species 120 (Scheme [28]).[7]
[44] A subsequent attack of the sulfonate anion on 120 generates an aurated alkenyl intermediate 121, which, in turn, undergoes a catalyst transfer with the substrate to deliver the alkenyl
sulfonate product 122 and regenerate the goldacetylide 118. Both, 5 and 6-membered cycles could be produced in moderate to good yields following
this procedure. The efficiency of the transformation was found to be dependent on
the nature and substitution pattern of the chain tethering the alkyne moiety and the
sulfonate group: geometrically restricted substrates were observed to be more reactive.
While the scope of this transformation remains so far limited, the easy access to
the substrates and the usefulness of the alkenyl sulfonate products makes this approach
particularly attractive from a synthetic point of view.
Scheme 28 Generation of gold vinylidenes by substitution of sulfonate leaving groups with a
goldacetylide
Recently, Fürstner and Debrouwer reported another protocol for the generation of gold
vinylidene species by an intermolecular nucleophilic attack of a goldacetylide on
an activated aldehyde (Scheme [29]).[45] While this study was not dedicated to the development of a new synthetic transformation,
the described procedure undoubtably possesses some synthetic potential. The authors
have shown that the treatment of goldacetylide 124, generated by reaction of the TMS-alkyne 123 with a stoichiometric amount of (IPr)AuOH, with TBSOTf at –78 °C led to the formation
of a transient gold vinylidene species 125.[46] This process probably involves the nucleophilic addition of the goldacetylide moiety
onto an O-silyloxocarbenium intermediate. Interestingly, 125 rapidly evolved at –78 °C via the formal transfer of the oxygen residue from the
benzylic position to the carbenic one to produce the HOTf·acylgold complex 126. At 20 °C, 126 suffered an extrusion of CO that produced 127. Alternatively, its treatment with methanol delivered the corresponding ester 128. Both intermediates 125 and 126 could be detected using NMR spectrometry technics and the structure of 126 was confirmed by X-ray analysis.
Scheme 29 Transient vinylidene species generated by reaction between a goldacetylide and an
oxocarbenium ion
Scheme 30 Generation of gold vinylidenes by hydride transfer from an intermediate alkenyl-gold
species
Finally, Fensterbank, Gandon, and Gimbert have reported the involvement of intermediate
gold vinylidene species 132 in the gold-catalyzed selective conversion of 1,6-allenynes 129 into hydrindienes 133 (Scheme [30]).[47] The singularity of the process, as compared to those presented above, lies in the
mechanism leading to the formation of the gold vinylidene. The authors have proposed
based on a series of D-labeling experiments and computational studies, that the alkenylgold
species 131, initially produced by nucleophilic attack of the allene in 130 on the gold-activated alkyne moiety, could undergo a favorable 1,4-hydride shift.
This unusual transfer would produce a gold vinylidene intermediate 132 which, in turn, could insert into a non-activated C–H bond to deliver compound 133. Interestingly, while this process was found to be very efficient with gold complexes
bearing bulky phosphine or NHC ligands [as well as gold(I)/(III) halides], the use
of gold(I) complexes possessing less sterically demanding ligands (Et3P, Ph3P) led to a divergence in selectivity with the formation of Alder-ene type products
134.
5
Conclusion
While gold vinylidenes species have been proposed as reactive intermediates in synthetic
processes as early as 2004, the development of transformations based on their efficient
generation and selective reaction has only started in 2012, after the groups of Hashmi
and Zhang uncovered the synthetic potential of dual gold catalysis with diyne substrates.
Although gold vinylidenes can be accessed by a 1,2-migration process from Au-activated
halogeno- or silylalkynes (see Section 2), this route lacks generality. Depending
on the reaction conditions and the substitution pattern of the substrate, the 1,2-migration
pathway can be in competition with the direct nucleophilic functionalization of the
alkyne and/or with the dehalogenation/desilylation of the gold-activated alkyne. In
contrast, and as exemplified in Section 3, the use of dual gold catalysis with diyne
substrates has been shown to be a far more robust and reliable way to produce gold
vinylidenes. The reactivity principle lies in the possibility to generate in situ,
from a terminal alkyne, a goldacetylide that would undergo an intramolecular nucleophilic
addition onto a second gold-activated alkyne. The increased number of studies that
have been made in the field of dual gold catalysis during the last 5 years have already
allowed enlightening some unique and unsuspected reactivities of gold vinylidenes.
These species have been demonstrated to react, for instance, with carbon or oxygen-based
nucleophiles, by oxidation or by C–H insertion at a non-activated center. If one considers
that the regioselective reaction of an electrophilic species at the carbon of a goldacetylide
could theoretically generate a gold vinylidene species, the application of this simplistic
reactivity principle with various electrophiles should lead in the future to new exciting
discoveries and consequently to an increasing interest for the use of gold vinylidenes
in synthetic organic chemistry.
